- Reduced price
- New
Xmotorstore Payments
Malossi 5515740 strobe controller
Code: 5515740
This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many pistols on the market. To activate the controller simply connect the leads to the battery and ignition coil. Once map 0 has been set in the MHR TEAM II Malossi internal rotor ignitions, the calibration conditions are obtained simply by heating the engine and bringing it to a fixed rotation speed of 4000 rpm. At this point it will be sufficient to aim the flashing light beam on the timing reference previously traced on the ignition, as indicated in the specific instruction, checking that the references traced in the ignition adjustment phase correspond. If so, the advance will be correctly set on 16° and it will be possible to act on the offset trimmer, present on the control unit, to adjust this value as desired.
Malossi 5515740 strobe controller
Code: 5515740
This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many pistols on the market. To activate the controller simply connect the leads to the battery and ignition coil. Once map 0 has been set in the MHR TEAM II Malossi internal rotor ignitions, the calibration conditions are obtained simply by heating the engine and bringing it to a fixed rotation speed of 4000 rpm. At this point it will be sufficient to aim the flashing light beam on the timing reference previously traced on the ignition, as indicated in the specific instruction, checking that the references traced in the ignition adjustment phase correspond. If so, the advance will be correctly set on 16° and it will be possible to act on the offset trimmer, present on the control unit, to adjust this value as desired.
Reference: 5519630
Brand: Malossi
Malossi Mhr team II 5519630 internal rotor ignition for horizontal and vertical Minarelli. It manages multiple maps at the same time without having to resort to PDAs, with a simple click. It allows you to translate the selected map by moving the OFFSET (+ or - 2 °). Malossi ignitions concentrate in themselves the maximum of technology applied to...
Reference: 5519631
Brand: Malossi
Malossi ignition for Minarelli AM6 50cc 2t. Malossi Code: 5519631 It manages multiple maps at the same time without having to resort to PDAs, with a simple click. It allows you to translate the selected map by moving the OFFSET (+ or - 2 °). Malossi ignitions concentrate in themselves the maximum of technology applied to competitions. The new internal...
Reference: 5519632
Brand: Malossi
Malossi ignition with internal rotor for Piaggio 50cc h2o 2t scooter. Malossi Code: 5519632 Attention: EXCLUDES THE ORIGINAL ELECTRICAL SYSTEM. Variable advance control unit equipped with 3 trimmers: MAPS trimmer: advance map selection OFFSET trimmer: selected map shift + or - 2 ° LIM trimmer: speed limiter intervention variation (16 possible positions) 8...
Reference: 5519635
Brand: Malossi
Malossi ignition with cone diameter 20 mm 5519635 Code: 5519635 Malossi ignition with internal rotor Mhr Team II with cone diameter 20 mm ATTENTION: with this type of ignition the vehicle's electrical system is excluded. The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers: the first (MAPS) to determine the...
Reference: 5519633
Brand: Malossi
Malossi ignition with internal rotor Mhr Team II Malossi Code: 5519633 Malossi ignition for Drr Drx 90 2016 The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers: -the first (MAPS) to determine the advance map selection - the second (OFFSET) allows you to move the selected map + or - 2 ° - the third (LIM)...
Reference: 5519634
Brand: Malossi
Malossi internal rotor ignition for Mhr Team II Malossi Code: 5519634 Malossi ignition for Mhr Team II Malossi ignitions concentrate in themselves the maximum of technology applied to competitions. The new internal rotor ignitions arise from the need to overcome the technical limitations of the original flywheel-ignition groups, which above 10,000 rpm do...
Reference: 246410113
Brand: Evok
EVOK Iron LED rear light with brake light, 22 LED, Plug&Play, for Piaggio Vespa 50 Special and Special Elestart, product code 246410113. Bright LED output. Not road approved.
Reference: 67 9940
Brand: Malossi
Malossi secondary gears with increased section z 13 / 48 with flexible coupling 67 9940 Malossi code: 67 9940. Malossi secondary gears with increased section z 13 / 48 with flexible coupling for Gilera and Piaggio. The Malossi flexible coupling incorporates a system of elastic elements with very high resistance and deformability capable of absorbing the...
Reference: 144.010.001
Brand: POLINI
Cylinder with piston for Polini minitard air-cooled diameter 40 mm 50cc 2t. Polini code: 144.010.001 Cast iron cylinder with 2-ring piston. ATTENTION: The actual product differs from the photo.
Reference: 204.0773/B
Brand: POLINI
Polini piston 47.6 mm selection B (47.555 mm) 204.0773/B
Reference: 3116992
Brand: Malossi
Malossi cylinder kit diameter 52 in aluminum Testa Rossa modular head Malossi code: 3116992 Malossi cylinder kit for DRR DRX 90 2T LC -2015. Fit only with Malossi crankshafts 5318440 (5316912: production discontinued). Malossi cylinder kit for DRR DRX 90 2T LC 2016-. Fit only with Malossi crankshafts 5318440 (5316912: production discontinued).
Reference: 01.SZ.0212.L
Brand: Ohvale
Ohvale 110 4S timing chain. Ohvale code: 01.SZ.0212.L
Reference: 2015460
Brand: Malossi
Malossi 2015460 spring preload adjustment kit for Yamaha T Max Malossi Code: 2015460 Malossi spring preload adjustment kit for original fork for Yamaha T Max. Technical features: -Very light, entirely made of 6000 series aluminum alloy (with magnesium and silicon) -Preload adjustment cap range -5 / +25 mm -Laser engraving on the cap, for even easier...
Reference: 2140.03
Brand: Domino
Minicross Domino 2140.03 throttle control with knobs Technopolymer gas control with closed black mod 1127 knobs. Support material: Technopolymer Black colour Max travel: 74 mm Rapidity: 3.6 ° / mm Cable Type: Mono Cable
Reference: 01.SZ.0125.L
Brand: Ohvale
Ohvale 110 4S head gasket. Ohvale code: 01.SZ.0125.L
Reference: R01.SE.0204.L
Brand: Ohvale
Ohvale Gp-0 Gp-2 petrol tank cap. Ohvale Code: R01.SE.0204.L Ohvale tank cap complete with OR, compatible with all Ohvale GP-0 and GP-2 models with plastic tank.
Reference: 144.765.004
Brand: POLINI
Gas control for Polini minimotard and minicross
Reference: TMC486
Brand: GRC
chain tool minimoto for all minimoto chain. Universal minimoto chain breaker for all minimoto chains. Made in Italy with high quality standards. Compatible with standard and racing pocket chains.
Reference: 01.MO.0100.L
Brand: Ohvale
Ohvale 190 Daytona 4s engine sealed 01.MO.0100.L New Daytona 190 cc 4-speed engine. The 190 cc Daytona engine is Ohvale's official choice for original equipment, reliable and with excellent performance, it allows amateur but also racing use, the 190 Daytona version is compatible with Gp-0 and Gp-2. Attention: Engine with Ohvale seals. Attention: Engine...
Reference: MC5
Brand: HJC
Hjc F71 Tozz helmet. Advanced Fiberglass Composite Shell: Lightweight, with superior fit and comfort. Pinlock Ready HJ-38 VISOR: Offers 99% UV protection, anti-scratch coating; Two-way pivot ratchet ensures smooth ratchet movement and improved seal. Aerodynamic shell structure for extreme performance at maximum speeds. "ACS" Advanced Channeling...
Reference: 001002R02000
Brand: DM
Aluminum brake levers for minimoto, the levers are adjustable in excursion, allowing you to move the lever closer or further away from your hand. The brake levers are universal, compatible with all 22 mm half handlebars.
Malossi 5515740 strobe controller
Code: 5515740
This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many pistols on the market. To activate the controller simply connect the leads to the battery and ignition coil. Once map 0 has been set in the MHR TEAM II Malossi internal rotor ignitions, the calibration conditions are obtained simply by heating the engine and bringing it to a fixed rotation speed of 4000 rpm. At this point it will be sufficient to aim the flashing light beam on the timing reference previously traced on the ignition, as indicated in the specific instruction, checking that the references traced in the ignition adjustment phase correspond. If so, the advance will be correctly set on 16° and it will be possible to act on the offset trimmer, present on the control unit, to adjust this value as desired.