Xmotorstore Payments
Malossi ignition with cone diameter 20 mm 5519635
Code: 5519635
Malossi ignition with internal rotor Mhr Team II with cone diameter 20 mm
ATTENTION: with this type of ignition the vehicle's electrical system is excluded.
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows to move the selected map + or - 2 °
the third (LIM) indicated especially for 4-stroke engines, allows you to vary the intervention of the rev limiter (from 11,500 to 14,300 Rpm + limiter excluded)
It is also equipped with 8 preset mappings which are divided into:
-7 for 2T engines variable advance
-1 with fixed advance
High voltage coil
- Maximum discharge voltage> 40 KV for engine rotation speeds> 3000 Rpm
- Maximum peak open gap coil voltage> 50KV
-Rise time @ 10bar> 1750V / uS
Rotor-stator group
- Weight reduction of the stator part of about 30%, total -100gr.
- High permeability monolithic magnetic circuit.
-Optimization of the magnetic path.
- Strengthening of the wound part, with a cable of higher thermal class and an increase in the diameter of the wire.
-Electric efficiency improved by + 20%.
-Reduction of the minimum starting speed from 450 Rpm to 370 Rpm.
- Miniature waterproof connector, IP67 certified, with retention lock.
-Automotive class wiring.
-Rotor Ø 58 with permanent Neodymium magnets.
Malossi ignition compatible with:
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA ETS 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK - ET3 Primavera 125 2T
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK XL 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA PK FL 125
5519635 INTERNAL ROTOR IGNITION MALOSSI PIAGGIO VESPA Primavera 125 2T
Reference: 5519640
Brand: Malossi
Malossi high voltage coil 5519640
Reference: 5518588B
Brand: Malossi
Malossi Digitronic Mhr code 5518588B digital electronic control unit Malossi digital electronic control unit Digitronic Mhr Team with Trimmer. The MHR range is equipped with a non-remappable variable advance ECU.
Reference: 5518279B
Brand: Malossi
Malossi rotor and stator assembly for Vespa 5518279B engine Code: 5518279B Malossi rotor and stator assembly for Vespa engine, diameter 58 mm
Reference: 5515740
Brand: Malossi
Malossi 5515740 strobe controller Code: 5515740 This small-sized instrument not only allows the advance to be checked with disarming ease, thanks to a 200 lm flash with a duration of 10 µs and an extremely short delay (<1µs), but it also completely replaces the classic strobe guns, thanks to the its technical characteristics decidedly superior to many...
Reference: 5519119B
Brand: Malossi
Shielded Malossi spark plug cap 5519119B Malossi code: 5519119B
Reference: 5519221
Brand: Malossi
Malossi spark plug cable and shielded spark plug cap kit 5519221 Malossi code: 5519221 Shielded spark plug connection - Spark plug connection equipped with a high quality resistor, which guarantees constant resistance with minimal variations in overload conditions. -External body made with a robust rubber structure characterized by excellent resistance to...
Reference: 7416936B
Brand: Malossi
Malossi cooling fan diameter 167 mm for Vespower ignition 7416936B Malossi code: 7416936B
Reference: 31 8564
Brand: Malossi
Malossi MHR 50cc aluminum cylinder Malossi code: 31 8564
Reference: 2KK6202BCS25
Brand: XRACING
Koyo 2KK6202BCS25 calibrated racing minibike engine bearings. Special bearings for minibike racing engines, specific for racing engines, the manufacturing with tolerance calibration on the bearing allows perfect sliding of the crankshaft, without vibrations and with crazy performances. Compatible for: Polini minibike engine bearings. Ghr minibike engine...
Reference: 204.0464
Brand: POLINI
Polini piston diameter 47.4 mm with cast iron cylinder. Polini code: 204.0464 Polini piston for: Aprilia, Aprilia ET 50, Aprilia Europa 50, Aprilia Futura 50, Aprilia Red rose 50, Aprilia Replica 50, Aprilia RX 50, Aprilia Tuareg rally 50, Aprilia Tuareg Wind 50, Atala, Atala Master 50, Benelli, Benelli Devil 50, Benelli Spring 50, Malaguti, Malaguti Mdx...
Reference: 5514027
Brand: Malossi
Malossi internal rotor ignition with variable advance 5514027 for Honda Sf 4T 100 cc. Malossi Code: 5514027 Malossi internal rotor ignition with variable advance for Honda Sf 4T 100 cc
Reference: 5512429
Brand: Malossi
Malossi Digitronic 5512429 digital electronic control unit Malossi electronic digital Digitronic control unit complete with coil with fixed advance.
Reference: 01.IF.0081.L
Brand: Ohvale
Ohvale Compl. front master cylinder Code: 01.IF.0081.L
Reference: 1613890.T0
Brand: Malossi
Fuel system Malossi Mhr team phbg 21 bs 1613890.T0 Malossi code: 1613890.T0 Application: Malossi fuel system for APRILIA SR 50 2T 1994-> Malossi fuel system for APRILIA AREA 51 50 2T LC Malossi fuel system for APRILIA MOJITO CUSTOM 50 2T Malossi fuel system for APRILIA RALLY 50 2T (MINARELLI) Malossi fuel system for APRILIA SR NETSCAPER 50 2T LC...
Reference: FM992/04
Brand: BMC
Bmc air filter Yamaha X-Max Czd 300 2017 washable racing sport. Bmc code: FM992/04. Compatible with: MWD TRICITY 300 (OEM B74WE4450000) 2020 >. X-MAX / CZD 300 2017 >. X-MAX / YPR 250 (Turkish Market) 2018 >. Base Width/External Diameter (mm) 175. Length/Base Internal Diameter (mm) 471. Filter material: Oiled cotton gauze. Washable: Yes....
Reference: 1114098B
Brand: Malossi
Complete Malossi gasket kit for 74 mm diameter H2O 4T cylinder kit Malossi code: 1114098B
Reference: 02671
Brand: DELLORTO
Dellorto phbg 21 bs carburetor with manual choke knob. Motor mount: 25 Filter connection: M32x1.25 Gas valve: 50 Conical needle: 16 Pulverizer: 262 AU Maximum jet: 96 Minimum jet: 48 Starter jet: 60 Float: 4 gr Dellorto code 02671
Reference: 076
Brand: DM
Handlebar vibration dampers Dm red. The Dm mini bike rockers are used to stabilize and protect the handlebar from impacts.
Reference: 171.0543
Brand: POLINI
Polini ignition for Vespa 125 et3. Polini Code: 171.0543. Polini ignition for: Vespa, Vespa 125 2t primavera, Vespa 50 2t special, Vespa 125 primavera et3. Cone diameter 20 mm Flywheel 1.2 kg Flywheel extractor dimensions 22x1.5 mm (code 267000070)
Reference: 267209902
Brand: Wrapper
Fire Red wrapping can. Removable paint can Wrapper Red Fire 400 ml. Wrapping in spray, perfect for rims and tuning. How does the wrapping paint work? It is applied like a normal varnish, once dry it will become like a wrapping film, with the possibility of removing it at any time. CODE: 267209902 EAN: 5907547716737 SUPPLIER CODE: 400WRAPPER3000
Reference: FM998/08
Brand: BMC
Bmc air filter Honda CRF 250 R 2014-2017 washable racing sport. Bmc code: FM998/08. The cotton sports air filter is installed in the airbox to replace the original air filter. It is produced with highly performing materials that allow an increase in the air flow to the engine compared to the original paper or sponge air filter, while ensuring superior...
Reference: 1611034
Brand: Malossi
Malossi phbl 25 bd fuel system for Piaggio 1611034 Malossi code: 1611034 Application: Malossi fuel system for Piaggio Hexagon LX 125 2T LC Malossi fuel system for Piaggio Hexagon LXT 180 2T LC Malossi fuel system for Piaggio Hexagon 125 2T LC Malossi fuel system for Piaggio Hexagon 150 2T LC
Reference: 504004
Brand: T4TUNE
Speedfight 265mm adjustable hydraulic shock absorber
Malossi ignition with cone diameter 20 mm 5519635
Code: 5519635
Malossi ignition with internal rotor Mhr Team II with cone diameter 20 mm
ATTENTION: with this type of ignition the vehicle's electrical system is excluded.
The MHR Team II range is equipped with a non-remappable variable advance control unit with 3 trimmers:
the first (MAPS) to determine the selection of the advance map
the second (OFFSET) allows to move the selected map + or - 2 °
the third (LIM) indicated especially for 4-stroke engines, allows you to vary the intervention of the rev limiter (from 11,500 to 14,300 Rpm + limiter excluded)
It is also equipped with 8 preset mappings which are divided into:
-7 for 2T engines variable advance
-1 with fixed advance
High voltage coil
- Maximum discharge voltage> 40 KV for engine rotation speeds> 3000 Rpm
- Maximum peak open gap coil voltage> 50KV
-Rise time @ 10bar> 1750V / uS
Rotor-stator group
- Weight reduction of the stator part of about 30%, total -100gr.
- High permeability monolithic magnetic circuit.
-Optimization of the magnetic path.
- Strengthening of the wound part, with a cable of higher thermal class and an increase in the diameter of the wire.
-Electric efficiency improved by + 20%.
-Reduction of the minimum starting speed from 450 Rpm to 370 Rpm.
- Miniature waterproof connector, IP67 certified, with retention lock.
-Automotive class wiring.
-Rotor Ø 58 with permanent Neodymium magnets.
