Xmotorstore Payments
Malossi 5519600B Tc Unit O2 controller lambda emulator
Malossi code: 5519600B
The use of the new O2 controller allows the management of carburetion in the area where the Lambda probe controls the content of the air-petrol mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a value different from the stoichiometric one, enriching the A/F ratio (Air/Fuel ratio) to improve torque and power while always respecting the engine's DNA.
It is the main objective of the Malossi research and development department to ensure that each vehicle corresponds to a calibration designed to optimize performance and consumption.
Complete control of the carburetion is achieved by combining the O2 controller with the Force Master ECU. The synergy of these two devices has no limits, the entire quoted plan is managed, controlled and optimized for any processing step proposed by Malossi.
The evolution that engine control systems have had over the last few years has led to the design of this new version. The emulation of the Lambda sensor signals now perfectly corresponds to the original sensor, while the aesthetic appearance has been refined and has been enriched with an essential optical interface, which emulates the actual functioning of the device.
The Power LED allows you to check the correct power supply, while the remaining two LEDs show the carburetion level. When the vehicle is started, the Power LED and the Rich LED come on. After a warm up period of the probe, if you are in the closed loop control area of the Lambda, you will see the two Rich and Lean LEDs light up alternately. This type of behavior highlights the correct functioning of the device through continuous calibration of the A/F titre.
Malossi lambda emulator for:
Malossi lambda emulator for YAMAHA T MAX 500 ie 4T LC 2004->2007.
Malossi lambda emulator for YAMAHA T MAX 500 ie 4T LC 2008->2011.
Malossi lambda emulator for MBK EVOLIS 250 ie 4T LC 2014->.
Malossi lambda emulator for YAMAHA AEROX 4 50 ie 4T LC euro 4 2018-> (A333E).
Malossi lambda emulator for YAMAHA NEO'S 4 50 ie 4T LC euro 4 2019->.
Malossi lambda emulator for YAMAHA X CITY 250 ie 4T LC euro 3 2014-> (G3B7E).
Malossi lambda emulator for YAMAHA X MAX 125 ie 4T LC euro 3 <-2008.
Malossi lambda emulator for YAMAHA X MAX 125 ie 4T LC euro 3 2014->2016 (E3M1E).
Malossi lambda emulator for YAMAHA X MAX 125 ie 4T LC euro 3 2009->2013.
Malossi lambda emulator for YAMAHA X MAX 250 ie 4T LC euro 3 2010->2013 (G389E).
Malossi lambda emulator for YAMAHA X MAX 250 ie 4T LC euro 3 2014->2017 (G3B3E).
Malossi lambda emulator for YAMAHA X MAX 250 ie 4T LC euro 3 2008->2009 (G362E).
Reference: IMA-20100-0.05
Brand: CS Racing
Iame Cs cylinder gasket (5 pieces)
Reference: GHR 501.001
Brand: GHR
Complete 40cc air Ghr engine ready to be installed on the minimoto. Ghr minimoto engine complete with muffler, silencer, 15mm carburetor, venturi and filter. Ghr motor available with 10/12/14/15 flange or with flange. At the time of purchase, insert the desired flange in the notes.
Reference: 4519021
Brand: Malossi
Malossi Sport windshield for Honda Sh 4519021 Malossi code: 4519021. Dark smoke colored screen. Length 39 cm. Height 27.5 cm. Thickness 0.3 cm.
Reference: 246410103
Brand: Evok
EVOK Iron LED front headlight for Vespa 50 N, L and R. 6000K LED with DRL, proprietary voltage converter included and anti-flicker system. Plug & Play. Not road legal.
Reference: 5312393
Brand: Malossi
Malossi complete connecting rod 5312393 Malossi code: 5312393 Malossi complete connecting rod with 12 mm diameter pin and 80 mm distance between centers.
Reference: 96481581A
Brand: Ducati
Complete exhaust system for Ducati Diavel 1260 and 1260 S (MY 2019–2020), product code 96481581A. Increased torque and power, 6 kg weight reduction. Track use only.
Reference: 51 8752
Brand: Malossi
Malossi Multivar 51 8752 Variator for Peugeot Code: 51 8752 Malossi Multivar variator for scooters. Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in gear,...
Reference: 4620162
Brand: Malossi
Pair of front and rear shock absorbers Malossi Rs24 4614479 for Piaggio Malossi code: 4620162 Pair of Malossi shock absorbers, front wheelbase 181 mm and rear wheelbase 333 mm 10" tire shock absorbers These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today: -Type:...
Reference: 504021
Brand: T4TUNE
Vespa hydraulic shock absorber 266mm
Reference: 210.0049/12
Brand: POLINI
Polini crankshaft for vertical Minarelli (model CY, MY, CW). Polini code: 210.0049/12 Polini Motori implements the range of crankshafts dedicated to scooters equipped with Minarelli engines (model CY, MY, CW). With the aim of improving and increasing resistance, quality and performance, the billet connecting rod has the possibility of being able to use...
Reference: 7115500
Brand: Malossi
Malossi Mhr 7115500 radiator Malossi code: 7115500. Naked Malossi Mhr radiator. Length 30.4 cm. Height 19.8 cm. Thickness 5 cm.
Reference: 6215006BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215006BS Malossi brake pads for BENELLI 491 SPORT 50 2T LC (MINARELLI) Rear. Malossi brake pads for GILERA RUNNER FX 125 2T LC Rear. Malossi brake pads for GILERA RUNNER FXR - SP 180 2T LC Rear. Malossi brake pads for GILERA RUNNER PureJet 50 2T LC 2006-> Rear. Malossi brake pads for GILERA RUNNER SP...
Reference: 5519119B
Brand: Malossi
Shielded Malossi spark plug cap 5519119B Malossi code: 5519119B
Reference: 267209934
Brand: Wrapper
Can of removable gold glitter paint. Removable paint spray Gold glitter wrapper 400 ml. Spray can wrap, perfect for rims and tuning. How does the wrapping paint work? It is applied like a normal varnish, once dry it will become like a wrapping film, with the possibility of removing it at any time. CODE: 267209934 EAN: 5907547717086 SUPPLIER CODE:...
Reference: 204.0817/A
Brand: POLINI
Polini piston diameter 40.2 mm selection A (40.155 mm) Polini piston for: Aprilia, Aprilia AF1 50, Aprilia Mx 50, Aprilia RS 50, Aprilia RX 50, Aprilia TUONO 50, Beta, Beta RR 50, Fantic motor, Fantic motor Caballero, Fantic motor Enduro competition 50, Fantic motor Enduro performance 50 , Fantic motor Motard competition 50, Fantic motor Motard...
Reference: 241.704
Brand: POLINI
Polini Variator for Hi-speed Peugeot 50 Speedfight 3 4T Sym Mio Code: 241.704 Variator supplied with a set of 16x13 4.9 gr rollers. Engine: XS1P37QMA 2 Application: Peugeot, Peugeot Speedfight 3 50 4T, Peugeot Tweet 50 4T, Sym, Sym Mio 50 4T Corsa 46 mm, Sym Jet4 50 4T Corsa 46 mm, Sym Symphony 50 4T S, SR Corsa 46 mm, Sym Symply II 50 4T Corsa 46 mm, Sym...
Malossi 5519600B Tc Unit O2 controller lambda emulator
Malossi code: 5519600B
The use of the new O2 controller allows the management of carburetion in the area where the Lambda probe controls the content of the air-petrol mixture to be introduced into the combustion chamber. This device is able to make the lambda probe work at a value different from the stoichiometric one, enriching the A/F ratio (Air/Fuel ratio) to improve torque and power while always respecting the engine's DNA.
It is the main objective of the Malossi research and development department to ensure that each vehicle corresponds to a calibration designed to optimize performance and consumption.
Complete control of the carburetion is achieved by combining the O2 controller with the Force Master ECU. The synergy of these two devices has no limits, the entire quoted plan is managed, controlled and optimized for any processing step proposed by Malossi.
The evolution that engine control systems have had over the last few years has led to the design of this new version. The emulation of the Lambda sensor signals now perfectly corresponds to the original sensor, while the aesthetic appearance has been refined and has been enriched with an essential optical interface, which emulates the actual functioning of the device.
The Power LED allows you to check the correct power supply, while the remaining two LEDs show the carburetion level. When the vehicle is started, the Power LED and the Rich LED come on. After a warm up period of the probe, if you are in the closed loop control area of the Lambda, you will see the two Rich and Lean LEDs light up alternately. This type of behavior highlights the correct functioning of the device through continuous calibration of the A/F titre.
