Xmotorstore Payments
Pair of front and rear shock absorbers Malossi Rs24 4614479 for Piaggio
Malossi code: 4620162
Pair of Malossi shock absorbers, front wheelbase 181 mm and rear wheelbase 333 mm
10" tire shock absorbers
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank
-Use: racing scooter
-Shock absorber rod Ø 14 mm in 38 NiCrMo4UNI 7845 hardened and tempered steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension
-New lamellar system in harmonic steel which allows for very precise calibration
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Micrometic adjustment of spring pre-load via ring nuts
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions
-Double adjustment of the hydraulic compression braking, pre-selectable on approximately 10 positions each, separate for low and high speed
-Special oil with low viscosity and practically insensitive to temperature variations
-External compensation tank which allows an increase in the quantity of internal fluids
- Wheelbase adjustment of 25 mm (only for rear shock absorber)
- Wheelbase: rear 333 + 25 mm - front 181 mm
-Stroke: rear 62 mm - front 45 mm
Pair of Malossi shock absorbers for:
Pair of Malossi shock absorbers for Piaggio Quartz 50 2T LC.
Pair of Malossi shock absorbers for Piaggio Zip SP 50 2T LC 2001->.
Pair of Malossi shock absorbers for Piaggio Zip SP 50 2T LC <-2000.
Reference: 01.TE.0006.L
Brand: Ohvale
Galvanized U-bolt for Gp-0 and Gp-1 rear shock absorber fixing. Ohvale code: 01.TE.0006.L
Reference: 250.031
Brand: POLINI
Polini clutch bell for Honda Sh Evolution model 125 mm diameter Code 250.031 This Polini clutch bell is compatible as an original spare. Diameter: 125 mm Weight: 770 gr Application: Honda, Honda @ 125/150, Honda Nes 125/150, Honda Bali 125/150, Honda Dylan 125/150, Honda Pantheon 125 Inject / 150 Inject, Honda PS 125i / 150i, Honda Sh 125 / 125i / 150 /...
Reference: 03.RP.0015.L
Brand: Ohvale
Ohvale Rear wheel spacer LH till 2022 Code: 03.RP.0015.L
Reference: 250.041
Brand: POLINI
Polini clutch bell for Peugeot Metropolis 400 4t. Polini code: 250.041 Robust, precise and resistant to the highest temperatures of use, the Polini evolution Speed Bell clutch bell for Peugeot Metropolis 400 optimizes power delivery and ensures top performance. Forged in special steel and machined with CNC machinery, the Polini clutch bell, with an...
Reference: 254.0132
Brand: POLINI
Polini cylinder base gasket 0.05 mm thick (quantity available 10 pcs) Polini cylinder base gasket 0.05 mm thick for Yamaha big evolution Polini cylinder base gasket for: Aprilia, Aprilia Aera 51, Aprilia Rally 50, Aprilia Sonic 50, Aprilia Sr 50, Benelli, Benelli 491 50, Benelli K2 50, Beta, Beta Ark 50, Beta Eikon 50, Italjet, Italjet Dragster 50,...
Reference: 215.0428
Brand: POLINI
Intake manifold Minarelli AM6-DERBI diameter 30 Dellorto 360 °. Polini Code: 215.0428 APRILIA : AF1 50 MINARELLI AM6 - MX 50 Minarelli AM6 - RS 50 dal 2006 -> (DERBI D50B) - RS 50 MINARELLI AM6 - RS4 50 (DERBI D50B) - RX 50 MINARELLI AM6 - RX-SX 50 dal 2006-> (DERBI D50B) - TUONO 50 Minarelli AM6 BETA : RR 50 AM6 (1999-2002) - RR 50 ENDURO, MOTARD...
Reference: 246472219
Brand: Evok
Complete EVOK Iron LED front headlight with triple lens, Plug&Play, for Piaggio Ciao, product code 246472219. 12V LED, works with AC and DC. Not road approved.
Reference: pastiglie-stamas-mecc
Brand: STAMAS
Brake pads for Stamas mechanical caliper.
Reference: 204.0004/A
Brand: POLINI
Sachs 50cc 48mm piston A selection (47.935 mm) 204.0004/A
Reference: 11 3668
Brand: Malossi
Malossi intake gasket pack for MBK EV 50 cc Malossi code: 11 3668 Malossi gasket for MBK EV 50. Replacement for fuel system 1610545 - 1610634 - 1610635: production discontinued.
Reference: N.GREY
Brand: HJC
Hjc V60 helmet Classic style with a modern twist, the HJC V60 adds a new category of helmets to our off-road line for 2022. Inspired by the original 1980s FG-01, the V60 goes beyond the vintage look with new-age features such as a lightweight fiberglass shell, a large internal IS-10 VISOR sun, integrated pockets for speakers, a removable and washable...
Reference: avv.Lem
Brand: Lem motor
Lem minicross starter cover, complete with lever, gears and gasket. This replacement is compatible with Lem A10 and Lem A12.
Reference: 01.SB.0215.L
Brand: Ohvale
Ohvale Gasket cylinder block Code: 01.SB.0215.L
Reference: 5114272
Brand: Malossi
Malossi Multivar variator 2000 5114272 Code: 5114272 Multivar 2000 When technology makes the difference. Multivar: the sports change with burning acceleration that does not give space! A jewel to be set in your scooter. Too bad that it cannot be exhibited, it is so perfect! Designed by highly experienced engineers, produced in full in the Malossi...
Reference: 01.SW.0316.L
Brand: Ohvale
O-RING 5×1.8 Ohvale 160 4SCode: 01.SW.0316.L
Pair of front and rear shock absorbers Malossi Rs24 4614479 for Piaggio
Malossi code: 4620162
Pair of Malossi shock absorbers, front wheelbase 181 mm and rear wheelbase 333 mm
10" tire shock absorbers
These special shock absorbers have technical characteristics that represent the maximum technological expression available on the market today:
-Type: hydropneumatic shock absorber with separate compensation tank
-Use: racing scooter
-Shock absorber rod Ø 14 mm in 38 NiCrMo4UNI 7845 hardened and tempered steel with hard chrome deposit 25-30 micron thick (surface hardness of the shaft not yet treated HRC 55/60)
-Piston Ø 36 mm with two independent disc packs, one in compression and one in extension
-New lamellar system in harmonic steel which allows for very precise calibration
-Piston guide shoe of the LUBRIFLON-PTFEB70 type (bronze filled modified compound)
- Sliding on DU GUIDE bush (compound obtained by sintering a state of spheroidal bronze on a suitably pressed mild steel strip and with subsequent impregnation and coating with a mixture of PTFE+FB)
- Scraper ring in SEALTHANE grade 9345 polyester resin
-Micrometic adjustment of spring pre-load via ring nuts
-Adjustment of hydraulic braking in extension pre-selectable on approximately 24 positions
-Double adjustment of the hydraulic compression braking, pre-selectable on approximately 10 positions each, separate for low and high speed
-Special oil with low viscosity and practically insensitive to temperature variations
-External compensation tank which allows an increase in the quantity of internal fluids
- Wheelbase adjustment of 25 mm (only for rear shock absorber)
- Wheelbase: rear 333 + 25 mm - front 181 mm
-Stroke: rear 62 mm - front 45 mm
