Cs crankshaft racing rod cnc (39.5 to 39.9)

Reference: Kit-revisione-fg-gubellini

Fg Gubellini minibike steering damper overhaul kit

Fg Gubellini minibike steering damper overhaul kit. Kit for overhauling the steering damper for minibikes, consisting of: Complete OR kits. Oil seal kit. Specific hydraulic oil for steering damper. Attention: photo purely illustrative, the actual kit differs from the images. Attention: we recommend contacting a specialized workshop to assemble the kit.

Reference: 143.750.007

Brand: POLINI

Minimoto Polini front brake disc DX SX d.122 143.750.007

Front brake disc for Polini minibike 122 mm, can be mounted on the right and left. We recommend the use of original Polini pads. Polini code: 143.750.007

Reference: 1005

Brand: STAMAS

Seat frame midi Stamas

Seat frame midi Stamas 

Reference: 143.305.010

Brand: POLINI

Set of screws and nuts for frame and fairings Polini minimoto 143.305.010

Set of screws and nuts for Polini minimoto frame and fairings. Polini code: 143.305.010 The Polini minimoto screw kit includes: Polini minimoto fairing screws 910. Polini minimoto frame screws 910. Set of screws for Polini minimoto model 910, generic. Attention generic kit for 910, 910 S, 910 RS, may not contain some variants.

Reference: F00 005

Brand: DM

Lightened rear hub 114 mm DM ( for hydraulic brake )

Rear hub dm for hydraulic brake Formula Lightened rear hub 114 mm DM weight 190g THE HUB DOES NOT INCLUDE THE BEARINGS

Reference: 143.760.004

Brand: POLINI

Minimoto Polini semi handle with bracelet 143.760.004

Semi handlebar with Polini minimoto bracelet. Polini code: 143.760.004 it is possible to use the Polini half handlebar on both the right and left side.

Reference: 001002SP1280

Brand: DM

Kit factory Dm stickers

Dm factory minimoto stickers kit. Graphic version for official Dm minibike. ATTENTION: THE STICKERS CAN BE MODIFIED BY DM TELAI WITHOUT NOTICE FOR BETTER AESTHETICS AND/OR SPONSOR NEEDS, XMOTORSTORE IS COMMITTED TO ALWAYS PROVIDE THE MOST UPDATED VERSION.

Reference: IMH-04000-40-C

Brand: CS Racing

Cs muffler for h2o engine (40cc or 50cc)

Cs muffler for h2o engine (40cc or 50cc).

Reference: pastiglie-stamas-mecc

Brand: STAMAS

Pair of brake pads for standard clamp

Brake pads for Stamas mechanical caliper.

Reference: 9005 S

Brand: STAMAS

Upper support bracket radiator Stamas

Upper bracket for Stamas radiator support

Reference: TCM012

Brand: Tecnominimoto

TCM sintered minimoto jaws

TCM sintered minimoto jaws for minimoto clutch, the radius of the body mass increased by 20%, Teflon-coated bushing on the pin, racing friction paste, used by all types of engine, has obtained excellent performance even on official bikes, effective in 80mm bells . First break-in at 7500 rpm.

Reference: 143.630.003

Brand: POLINI

Polini minibike rear brake caliper support columns 143.630.003

Mechanical rear brake caliper support columns for Polini 910 minimoto. Polini code: 143.630.003

Reference: 143.215.001

Brand: POLINI

Stud bolt series h2o cylinder fixing Polini 143.215.001

Series of Polini studs fixing h2o cylinder Length: 98mm Diameter: 6 mm Code: 143.215.001

Reference: 091001

Brand: GHR

Minimoto exhaust flange Ghr Bzm Cs

Connection between cylinder and exhaust for minimoto, compatible with: GHR, BZM, CS, IAME. The flange also includes the three high temperature O-rings, the O-rings allow to avoid the escape of the exhaust gases from the junction between the manifold and the curve and between the cylinder and the flange. Professional collector, in first choice metal....

Reference: 143.075.004

Brand: POLINI

Sprocket cover minimoto Polini 143.075.004

Sprocket cover on Polini minimoto engine. Protection for minibike sprocket 910 911. Polini code: 143.075.004.

Reference: 050.0958+050.0959

Brand: POLINI

Polini minimoto engine for Civ Junior A

Polini minimoto engine for Civ Junior A. Polini minimoto engine kit complete with exhaust and carburettor as per Junior A category of the Civ championship. The engine that will equip the Polini Junior A category is an air-cooled 40cc engine with a 15mm carburettor and a 12mm reduction flange on the exhaust. The characteristics vary every year based on the...