- On sale!
- Reduced price
- New
Xmotorstore Payments
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas.
We recommend combining the original Ghr muffler.
TYPE: Single cylinder two stroke
SUPPLY: Lamellar input
CARBURETTOR: Dell'orto PHBG D. 21 (not included)
BORE: 40 nominal
RACE: 39.6
COOLING: Water
COMPRESSION RATIO: 16.8
SPARK PLUG: NGK BR9EG/BR10EG
CLUTCH: Centrifugal 2 adjustable masses
IGNITION: Analog fixed advance
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas.
We recommend combining the original Ghr muffler.
TYPE: Single cylinder two stroke
SUPPLY: Lamellar input
CARBURETTOR: Dell'orto PHBG D. 21 (not included)
BORE: 40 nominal
RACE: 39.6
COOLING: Water
COMPRESSION RATIO: 16.8
SPARK PLUG: NGK BR9EG/BR10EG
CLUTCH: Centrifugal 2 adjustable masses
IGNITION: Analog fixed advance
Reference: X-Filtro
Brand: XRACING
New X-F special racing air filter 100% MADE IN ITALY use: high performance racing universal for: minibike motorbike scooter pitbike brand: Xmotorstore & Marchald Red sponge length: 140mm diameter: 85mm connection diameter: 60/65 mm suitable for venturi. washable X-F was born from the experience gained in years of competitions and from various tests,...
Reference: 02671
Brand: DELLORTO
Dellorto phbg 21 bs carburetor with manual choke knob. Motor mount: 25 Filter connection: M32x1.25 Gas valve: 50 Conical needle: 16 Pulverizer: 262 AU Maximum jet: 96 Minimum jet: 48 Starter jet: 60 Float: 4 gr Dellorto code 02671
Reference: X-SILred
Brand: XRACING
X-SIL carbon racing red minimoto silencer diameter 60 mm. Developed to ensure very high performance while maintaining the right level of sound absorption. Racing red anodized ergal cones. Central body in ultra-resistant carbon. High flow central barrel. Sound-absorbing in special composite with universal expansion and suitable for all minimoto mufflers....
Reference: GHR 058.001
Brand: GHR
Ghr exhaust manifold for 50cc engine
Reference: GHR 059.001
Brand: GHR
Ghr team expansion for 50cc engine. With springs and anti-vibration
Reference: 420015
Brand: XRACING
Motorcycle silicone fuel hose for various applications. This petrol hose for carburetor, tank, and other uses, allows maximum curvature without blocking the flow of fuel. These racing fuel hoses are suitable for all vehicles. Fuel pipe size: 1 METER Fuel tube internal diameter: 5mm External diameter of fuel pipe: 9mm Available colors: white petrol tube,...
Reference: AC5100-XRacing
Brand: XRACING
Air filter protective sock. An absolute novelty for the protection of the air filter, the mesh fabric sock allows for greater filtering of the aspirated material, guaranteeing clean air for the engine. The filter sock is handmade in Italy, with the highest quality materials. When to use the mesh on the air filter? - The filter protection can be used in...
Reference: 112.010.69
Brand: GRC
Minimoto water pump overhaul kit diameter 35 mm. The kit is universal, compatible with all minimoto water pumps.
Reference: 143.405.004
Brand: POLINI
Reed valve for Polini reverse engine. Polini code: 143.405.004
Reference: cod. 4428
Brand: POLINI
Polini minimoto sprocket in gold color from 45 to 73 teeth. Specific crown for Polini GP mini bikes.
Reference: 143.034.002
Brand: POLINI
6.2 hp engine gasket kit Polini. Gaskets for 6.2 hp engine air and liquid minimoto. Minimoto Polini engine Gasket kit. Polini code: 143.034.002
Reference: CTR.0050
Brand: CS Racing
Universal cs racing clutch cover for mini bikes. Compatible with : bzm, iame, cs, polini.
Reference: 1025
Brand: STAMAS
Stamas midi rear swingarm standard model 1025
Reference: 3009
Brand: STAMAS
Pair of Stamas brake levers, for mechanical cable brakes. The Stamas brake levers are adjustable, the distance of the lever from the knob is adjustable by means of a special screw. Compatible with 22mm half handlebars.
Reference: pinz-ass-post-form
Brand: Formula
Formula axial rear caliper. Rear hydraulic caliper for minimoto, axial attachment. Rear brake caliper for Blata and other minimoto, with axial attachment. The caliper kit includes the pads. Attention: Made to order, delivery 4 weeks.
Reference: 001002R002B0
Brand: DM
Conical spacer on the crown side DM, the spacer must be inserted between the swingarm and the wheel bearing with the diameter of the narrowest cone towards the bearing. The wheel spacer Dm has the following measures: Hole diameter 10 mm Outside diameter 24 mm Outside diameter narrow part 15 mm Spacer thickness 10 mm Dm code: 001002R002B0
Reference: GHR 068.015
Brand: GHR
Ghr flow diverter GHR flow diverter inserts for VITON reed valve. CNC machined flow diverters for maximum quality and performance on your minimoto. Compatible with iame, tcm, and other VITON reed valves. Available in variants: Ghr flow diverter 15 mm. Ghr flow diverter 21 mm.
Reference: 5011
Brand: STAMAS
Stamas front brake disc 148 mm diameter floating.
Reference: 6017
Brand: STAMAS
Complete Stamas sr r factory fairings kit including mudguards and raw disc protection.
Reference: 112.104.00
Brand: GRC
Bearing kit plus spacer for hub Grc Select the desired measure between: 90/94/110/114. L.90 front (for mechanical brake) L.94 front (for hydraulic-mechanical brake) L.111 rear (for mechanical brake) L.114 rear (for hydraulic brake)
Reference: IMA-20503
Brand: CS Racing
Iame exhaust gasket for flange 10 12 15. Cs exhaust gasket. ATTENTION: PACK OF 1 PIECE.
Reference: IMA-20900-40
Brand: CS Racing
Piston pin Iame 40cc / 50cc 10x30x6 (40cc) 10x33x6 (50cc)
Minibike engine Ghr gp1 h2o 50 factory racing without carburetor, filter and muffler. The Ghr engine block is applicable on any Italian minimoto, such as: Dm, Grc, Stamas.
We recommend combining the original Ghr muffler.
TYPE: Single cylinder two stroke
SUPPLY: Lamellar input
CARBURETTOR: Dell'orto PHBG D. 21 (not included)
BORE: 40 nominal
RACE: 39.6
COOLING: Water
COMPRESSION RATIO: 16.8
SPARK PLUG: NGK BR9EG/BR10EG
CLUTCH: Centrifugal 2 adjustable masses
IGNITION: Analog fixed advance