Xmotorstore Payments
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
Reference: 001002SP1200
Brand: DM
Rear wheel axle for steel swingarm since 2008 DM
Reference: 001002SP095D
Brand: DM
Rear wheel pin for aluminum swingarm Dm
Reference: NSK 6003V
Brand: XRACING
NSK racing high speed minimoto bell bearing, this bearing allows the bell to slide at very high speed without altering its stability, improving the performance of the clutch. Compatible with bell casings Cs, Iame, Bzm, Polini, Ghr, Xracing and others. Code: NSK 6003V Inner diameter: 17 mm External diameter: 35 mm Thickness: 10 mm
Reference: Koyo-6202C3-FG
Brand: XRACING
Pair of high-performance Koyo C3 engine bearings for racing minimoto engines. High reliability and smooth operation.
Reference: 7013
Brand: STAMAS
Spacer outside sprocket side for 5007P Stamas hub
Reference: 112.145.74
Brand: GRC
Front wheel pin 10x160 for hub (L) L.94 Grc
Reference: 059
Brand: DM
Pair of bearings with spacer For hub 116 mm minimoto DM.
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 1000620
Brand: Zocchi
Minimoto clutch lock 3 masses Zocchi
Reference: zoc100.0504
Brand: Zocchi
Minimoto clutch shim kit. Kit of washers for calibrating the minibike clutch weights. These "shims" are used to create the correct clearance between the bell and the minibike clutch. As a general rule, the total difference in diameter between the bell and the clutch must be 1 cm. (always check based on brand and model).
Reference: 2035 7 18NC
Brand: PBR
Reinforced M8 Z7 minimoto sprocket. Pinion for Polini minimoto.
Reference: A015BO
Brand: DM
DM front fairing bracket for minimoto, designed for side-mounted steering dampers.
Reference: tcm028dm
Brand: Tecnominimoto
Dm replica 28 mm fork legs in black aluminum. DM minimoto fork legs, 28 mm diameter, in black anodized aluminum. Attention: It is necessary to mount the "feet" of the previous replaced fork legs. Kit refers to the pair.
Reference: 2020/28x2
Brand: STAMAS
Pair of 22 mm Stamas handlebars for 28 mm forks.
Reference: MLL.0043
Brand: CS Racing
Black clutch springs wire 2, 7mm. The black springs are recommended on open engines, they allow a greater starting point.
Reference: 143.735.003
Brand: POLINI
Polini 910 minibike steering head with bearings. Polini Code: 143.735.003
Reference: MAS.HM2
Brand: CS Racing
Pair of weights for two-mass clutches GP HAMMER 2.0 New HAMMER 2.0 clutches born from the experience of our technicians directly from the most important competition fields, it has immediately become an irreplaceable tool !!! Precisely this experience of ours in the world of race minibikes and beyond ... always leads us towards a continuous evolution and...
Reference: Vaschetta-uni-red
Brand: XRACING
Minimoto water tank in red ergal. Xmotorstore presents its new product: Radiator water tank entirely machined from solid and anodized in red, particular attention has been paid to heat dissipation, thanks to the external grooves that allow easy cooling. Technical characteristics of the water tank: External diameter: 32 mm. Internal diameter: 22.5 mm....
Reference: GHR 024.001
Brand: GHR
Coupling shaft 14/5 X 32.3 for Ghr connecting rod compatible with Bzm, Iame, Cs, Ghr shafts.
KOYO racing minimoto wheel bearings 10x26x8, compatible with all minimoto bikes. The high-speed wheel bearings for minimoto allow you to improve the sliding of the minimoto when cornering.
