Xmotorstore Payments
Malossi Force master 2.1 electronic control unit 5519539 for Honda
Malossi code: 5519539
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of an input for capacitive ignition, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
± 14% at min/average/max
-Rev limiter: +800 RPM
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
4 different mappings:
-curve 0: original exhaust, original cylinder, original head, original cams, original filter
-curve 1: Malossi exhaust without DB killer, original cylinder, original head, original cams, original filter
-curve 2: original exhaust, original cylinder, original head, Malossi cams, original filter
-curve 3: Malossi exhaust without DB killer, original cylinder, original head, Malossi cams, original filter
Malossi control unit for:
Malossi control unit for Honda SH I 300 ie 4T LC euro 3 2011->2014 (NF02E).
Malossi control unit for Honda SH I 300 ie 4T LC euro 2 <-2010 (NF02E).
Reference: 03.RP.0004.L
Brand: Ohvale
Ohvale GP-2 rear wheel stud. Ohvale code: 03.RP.0004.L ATTENTION: 1 PIECE.
Reference: 04.CA.0013.L
Brand: Ohvale
Ohvale GP-7 Windshield 04.CA.0013.L Transparent windshield for Ohvale GP-7 250cc 4-stroke version. The windshield, also known as the GP-7 plexiglass windshield, is a very important aerodynamic element and enhances riding visibility. We recommend replacing it if damaged or scratched.
Reference: 2915089
Brand: Malossi
Malossi RACING spring set for original maxi scooter and quad clutch Malossi code: 2915089 RACING SPRING for ORIGINAL clutch Pre-hardened carbon steel springs with high yield strength, protected by a high heat-resistant paint in various colors. The different colors highlight the load of each set of springs.
Reference: 201.0170
Brand: POLINI
Polini 32 carburettor. Polini code: 201.0170 Air filter attachment d.54 Carburetor sleeve d.40
Reference: FC204C21
Brand: CAPIT
Capit Full-control 17 inch tire warmers Capit Full-control 17 inch tire warmers. The new Capit Full CONTROL tyrewarmers for motorcycles were developed directly from the world of MotoGP, and are now also offered to an audience of non-professional riders. Double Teflon heating cable arranged radially for a reduction in heating time and uniform heat...
Reference: 61 8233
Brand: Malossi
Malossi TORQUE DRIVER torque driver with d.134 Malossi code: 61 8233 Malossi torque drivers for GILERA EASY MOVING 50 2T. Malossi torque drivers for GILERA STORM 50 2T. Malossi torque drivers for GILERA TYPHOON 50 2T. Malossi torque drivers for PIAGGIO FREE 50 2T. Malossi torque drivers for PIAGGIO NRG 50 2T LC. Malossi torque drivers for PIAGGIO NRG MC2...
Reference: 001002R04800
Brand: DM
Minibike brake wire 100 cm. DM Code: 001002R04800
Reference: 120-used-DM
Brand: DM
USED DM handlebars complete with 28 mm diameter clamp. Complete kit of used clip-on handlebars and clamps for DM minimotos with 28 mm forks. Attention: Used, intact, and usable product. Attention: Product not subject to warranty and/or return.
Reference: 203.0164
Brand: POLINI
Polini air box diameter 60mm for scooter. Polini Code: 203.0164 Mouth: 60 mm Length: 190 mm Diameter: 95 mm
Reference: 01.SD.0621.L
Brand: Ohvale
Ohvale Oil seal 16x26x7 Code: 01.SD.0621.L
Reference: 1128.82.40.06-1
Brand: Domino
Pair of Domino Dakar grips 128mm open 1128.82.40.06-1 Pair of grips in thermoplastic rubber with multi-pyramidal finish. Material: Thermoplastic rubber Black colour Length: 128 mm End: Open Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 54 mm Handle diameter Knob mounted: 31.5 mm
Reference: 31 9477
Brand: Malossi
Malossi MHR REPLICA cylinder kit diameter 47 in aluminum with pin diameter 12 H2O Malossi code: 31 9477 Malossi cylinder kit for PEUGEOT SPEEDFIGHT 2 50 2T LC from 2004 onwards. Malossi cylinder kit for PEUGEOT SPEEDFIGHT 50 2T LC. Malossi cylinder kit for PEUGEOT X-FIGHT 2 50 2T LC from 2004 onwards. Malossi cylinder kit for PEUGEOT X-FIGHT 50 2T LC.
Reference: 5312781
Brand: Malossi
Malossi Rhq crankshaft 5312781 for Peugeot Malossi code: 5312781 Malossi Rhq crankshaft with 12 mm diameter pin and 39.8 mm stroke.
Reference: 170.0210
Brand: POLINI
Si-Grillo engine casing, pedal start, electronic ignition, code 170.0210 Engine casing for: Piaggio, Piaggio Grillo Cylinder inlet diameter 50 mm.
Reference: 209.0221
Brand: POLINI
Yamaha Dt 50 Chappy gasket set 209.0221 Code: 209.0221 Polini gasket set for: Yamaha, Yamaha Chappy 50, Yamaha DT 50, Polini
Malossi Force master 2.1 electronic control unit 5519539 for Honda
Malossi code: 5519539
The Force Master 2.1 ECU is much easier to configure. Making products more ergonomic and simple to use has always been a Malossi objective: Force Master 2.1 is a contemporary, adequate and super performing product. With an interface for the K and CAN communication lines, a new user interface and the addition of an input for capacitive ignition, Force Master 2.1 is the ideal complement for managing vehicle performance: without functional limitations, it allows you to push the engine beyond the barrier of the original rev limiter.
Technical data
-Carburetion adjustment
± 14% at min/average/max
-Rev limiter: +800 RPM
-Temperature range = -30°C +80°C
-Minimum operating voltage = +7V
-Maximum operating voltage = +16V
-Average current absorbed <-200mA
-Environmental protection = IP65
4 different mappings:
-curve 0: original exhaust, original cylinder, original head, original cams, original filter
-curve 1: Malossi exhaust without DB killer, original cylinder, original head, original cams, original filter
-curve 2: original exhaust, original cylinder, original head, Malossi cams, original filter
-curve 3: Malossi exhaust without DB killer, original cylinder, original head, Malossi cams, original filter
