Xmotorstore Payments
Polini evolution gear casing for Piaggio Ciao mopeds. Polini code: 170.0309.
All the technical innovations of the Polini Evolution Gear Carter have been designed to increase resistance in the most demanding uses and guarantee robustness in the case of racing uses.
The new crankcase is characterized by a modern and integrated design with various technical features:
Increase in bearing seat sections to increase rigidity.
Revised wheel axle bearing with a larger diameter.
All pressed roller bearings and oil seals with spring loaded radial sealing lip.
5 hex head screws compared to the 4 hex head screws in the original reducer.
The gasket that seals the two crankcases is made up of a layer of aluminum to increase rigidity and two surface layers of rubber for sealing which guarantee its durability over time.
The Polini Evolution gear cover for Piaggio mopeds can be mounted both with the original gears and with Polini gears (code 202.1425 and 202.1427 or 202.1426) combined with the shims code 246.058 (Attention: after mounting the Polini gear cover, the "bicycle" mode will not can be used).
Polini evolution gear casing for Piaggio Ciao mopeds. Polini code: 170.0309.
All the technical innovations of the Polini Evolution Gear Carter have been designed to increase resistance in the most demanding uses and guarantee robustness in the case of racing uses.
The new crankcase is characterized by a modern and integrated design with various technical features:
Increase in bearing seat sections to increase rigidity.
Revised wheel axle bearing with a larger diameter.
All pressed roller bearings and oil seals with spring loaded radial sealing lip.
5 hex head screws compared to the 4 hex head screws in the original reducer.
The gasket that seals the two crankcases is made up of a layer of aluminum to increase rigidity and two surface layers of rubber for sealing which guarantee its durability over time.
The Polini Evolution gear cover for Piaggio mopeds can be mounted both with the original gears and with Polini gears (code 202.1425 and 202.1427 or 202.1426) combined with the shims code 246.058 (Attention: after mounting the Polini gear cover, the "bicycle" mode will not can be used).
Reference: 143.355.001
Brand: POLINI
Or water pump transmission (142.5x3.53 mm). Polini code: 143.355.001. Or water pump transmission for minimoto.
Reference: 01.MO.0040.L
Brand: Ohvale
Original Ohvale clutch plate set for 160 4S and 190 Daytona engines. Genuine replacement for clutch maintenance and restoration.
Reference: 31 9879
Brand: Malossi
Malossi cast iron cylinder kit diameter 47 with 12 diameter pin for Honda X8R X - X8R S 2T 50 cc Malossi code: 31 9879 Malossi cylinder kit for HONDA XBR X - XBR S 50 2T
Reference: 01.MA.0004.L
Brand: Ohvale
Ohvale throttle control with knobs. cod. Domino: 3520.03-01 cod. Ohvale: 01.MA.0004.L Aluminum throttle control with black knobs. With right knob overprinted on the tube.
Reference: V10 Vatt
Brand: HJC
Hjc V10 Vatt helmet New hjc collection 2023. The V10 goes beyond the vintage look with latest generation features such as the lightweight fiberglass shell, aerodynamic performance, emergency tabs for greater safety, detachable and washable interiors and easy bolts for quick VISOR replacement. This helmet is compatible with Smart HJC Bluetooth technology....
Reference: 6618911B
Brand: Malossi
Ball bearing diameter 15x42x13 mm Malossi for Vespa 6618911B Malossi code: 6618911B.
Reference: 175.0057
Brand: POLINI
Polini brake disc for Piaggio Zip, Mbk Booster diameter 155 mm Code 175.0057 Application: Aprilia, Aprilia Amico 50, Aprilia Sonic 50/50 Gp, Bsv, Bsv Ax 50, Bsv Jx 50 Gz / 50, Derbi, Derbi Vamos 50, Fantic motor, Fantico motor Big wheel 50, Garelli, Garelli Pony 50 racing, Garelli Sr, Gilera, Gilera Easy Moving 50, Italjet, Italjet Piasta 50 92, Italjet...
Reference: 404609
Brand: T4TUNE
Front right indicator liberty 50 125 2t 4t 09-13 Piaggio Liberty 50 2T Moc 50 2T 2009 2015 Piaggio Liberty 50 4T Moc 50 4T 2009 2016 Piaggio Liberty 125 4T 2V EU3 125 4T - 2V 2009 2012 Piaggio Liberty 125 4T 3V IE EU3 125 4T - 3V 2013 2015 Piaggio Liberty 150 4T 3V IE LEM 150 4T - 3V 2013 2015 Code: 404609 Ean code: 9900000048648
Reference: 205.0044
Brand: POLINI
Polini L-shaped segment diameter 41.4x2 mm. Polini code: 205.0044 Polini L-shaped segment for: Piaggio, Piaggio Bravo, Piaggio Cba, Piaggio Eco, Piaggio Si, Polini, Gilera, Gilera Cba
Reference: 204.0377/C
Brand: POLINI
Piston Puch Maxi 43.5mm selection C. Polini code: 204.0377/C
Reference: 218.0053
Brand: POLINI
Silencer for Polini high enduro exhaust 218.0053 Muffler measures: Outside diameter: 60 mm Muffler inlet diameter: ND Length: 290 mm
Reference: 246472199
Brand: Evok
EVOK Iron LED square 2-lens front headlight for Vespa 50 Special, product code 246472199. 6500K LED, Plug&Play installation, specific design for original handlebar.
Reference: WPA610
Brand: CAPIT
Accessory harness for direct feeding of Capit Warmme heated gloves, length 1.3 meters. NOTES: to be used in combination with WPA421 power supply cable
Reference: 01.FO.0010.L
Brand: Ohvale
Ohvale GP-0 and GP-2 Stand Fixing Pawl. Screw for Rear Stand on Ohvale Swingarm. The fixing pawl for the Ohvale GP-0 and GP-2 tripod. This screw pawl is designed for securely attaching the rear stand to the Ohvale swingarm and is fully compatible with the GP-0 and GP-2 models. Ohvale Code: 01.FO.0010.L. Ensure maximum stability and reliability during your...
Reference: 6115502B
Brand: Malossi
Malossi mobile half-pulley for MULTIVAR 2000 variator Malossi code: 6115502B
Reference: 267005450
Brand: C4
Includes 4 tools with various angles for the professional removal of various types of oil seals and o-rings
Polini evolution gear casing for Piaggio Ciao mopeds. Polini code: 170.0309.
All the technical innovations of the Polini Evolution Gear Carter have been designed to increase resistance in the most demanding uses and guarantee robustness in the case of racing uses.
The new crankcase is characterized by a modern and integrated design with various technical features:
Increase in bearing seat sections to increase rigidity.
Revised wheel axle bearing with a larger diameter.
All pressed roller bearings and oil seals with spring loaded radial sealing lip.
5 hex head screws compared to the 4 hex head screws in the original reducer.
The gasket that seals the two crankcases is made up of a layer of aluminum to increase rigidity and two surface layers of rubber for sealing which guarantee its durability over time.
The Polini Evolution gear cover for Piaggio mopeds can be mounted both with the original gears and with Polini gears (code 202.1425 and 202.1427 or 202.1426) combined with the shims code 246.058 (Attention: after mounting the Polini gear cover, the "bicycle" mode will not can be used).
