Xmotorstore Payments
Malossi Vr-One crankcase with reed valve 5718382
Code: 5718382
The VR-One is for power purists, for those who want to push their Vespa to the limit, but that's not all. It has the same mounting characteristics in the body of the V-One and the same cylinder housing possibilities thanks to the revised fluid dynamics of the crank chamber, the drilling of the studs and the same accessories supplied with the V-One (except for the mixer pin ).
This crankcase has been designed to withstand higher powers and for this reason it is supplied with ball bearings on flywheel side Ø25xØ52x15 and transmission side Ø25xØ62x12, which eliminate needle roller bearings and allow greater capacity to withstand radial loads and further resistance to loads. axial, not contemplated with the original roller bearings. Dedicated oil seals are also provided.
The greater resistance to the stresses due to the crank mechanism makes the crankcase perfect to be mounted with our single-ring MHR cylinders, art. 3117163 (stroke 57), but especially with the kit 3117361 (stroke 60). The natural combination for this configuration is with the Malossi full-shoulder 60 stroke crankshaft, supplied with the right balance and perfect for the reed valve power supply provided for the new VR-One.
Malossi crankcase compatible with:
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 80 2T
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 125 2T EURO 0-1
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 125 2T EURO 2 (VLX2M)
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 125 2T EURO 3
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 150 2T EURO 0-1
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 150 2T EURO 2 (VLX2M)
5718382 CRANKCASE MALOSSI VRONE REED VALVE VESPA VESPA PX 150 2T EURO 3
Reference: 5718383B
Brand: Malossi
Malossi VR-one bare engine casing 5718383B. Carter Maloss model vr-one. The images can sometimes differ from the product to which they refer.
Reference: 0616824B
Brand: Malossi
Malossi O-ring diameter 16x2.65 mm Malossi code: 0616824B
Reference: 0618108B
Brand: Malossi
Malossi Intake Gasket for VR-One Crankcase Malossi Code: 0618108B
Reference: 6618041B
Brand: Malossi
Malossi roller bearing diameter 29x35x13 mm 6618041B Malossi code: 6618041B
Reference: 1317660b
Brand: Malossi
Malossi MHR sleeve for carburetors diameter 34 with inlet diameter 39 Malossi code: 1317660b
Reference: 1317661b
Brand: Malossi
Malossi MHR FKM sleeve diameter 30 for Dell'Orto PHBH carburetors Malossi code: 1317661b
Reference: 170.0312
Brand: POLINI
Polini transmission cover for Piaggio Zip 50cc long wheel housing 12 and 13 inches. Polini code: 170.0312 Polini transmission cover for aprilia Mojito 50 2T Piaggio. Polini transmission cover for aprilia SR 50 2T LC Stealth, Racing, Netscaper. Polini transmission cover for aprilia SR 50 2T R, Factory (Piaggio) LC. Polini transmission cover for aprilia SR...
Reference: 112.284.12
Brand: GRC
Radiator Bushing + Anti-Vibration Rubber Grc 112.284.12 Grc Code: 112.284.12 Radiator Bushing + Anti-Vibration Rubber Grc
Reference: 209.0400
Brand: POLINI
Series of gaskets manifold big valve Mbk booster for mbk booster and Polini
Reference: 96780991A
Brand: Ducati
Star White Silk color covers for Ducati Multistrada plastic side cases, product code 96780991A. Original Ducati accessory for a distinctive look.
Reference: 204.0024
Brand: POLINI
Vespa Et3 125cc 57.4mm piston. Polini Code: 204.0024
Reference: 209.0461
Brand: POLINI
Gasket set Kymco Agility 50cc 4t 209.0461
Reference: 01.RP.0020.L
Brand: Ohvale
Bolt Ohvale M8x25 Code: 01.RP.0020.L
Reference: 11 9588
Brand: Malossi
Complete Malossi gasket kit for 47 diameter cylinder kit Malossi code: 11 9588
Reference: 01.AS.0202.L
Brand: Ohvale
Intake manifold Ohvale 110 with Mikuni 22 carburetor. Ohvale code 01.AS.0202.L Intake manifold for Ohvale with 110cc 4t engine, compatible with 4s and automatic versions.
Reference: 246472197
Brand: Evok
EVOK Iron LED rear light with 10 LED board, Plug&Play, for Piaggio Vespa 50 N / R / L, product code 246472197. Modern LED look. Not road approved.
Reference: 01.SW.0208.L
Brand: Ohvale
Ohvale Valve inner spring Code: 01.SW.0208.L
Reference: R01.CA.0004.L
Brand: Ohvale
Ohvale Cover tank fairing matt black or white Code: R01.CA.0004.L
Reference: 203.0175
Brand: POLINI
Polini Big Evolution air filter, Ø 55 mm. Polini code: 203.0175 Polini Big Evolution air filter, Ø 55 mm, with high-performance sponge, complete with hoses adaptable to the most popular carburetors.
Reference: 01.SB.0510.L
Brand: Ohvale
O-RING 27.4×2.65 Ohvale 110 A Code: 01.SB.0510.L
Reference: 001002A00900
Brand: DM
Pair of Dm minimoto spacers for water engine head
Malossi Vr-One crankcase with reed valve 5718382
Code: 5718382
The VR-One is for power purists, for those who want to push their Vespa to the limit, but that's not all. It has the same mounting characteristics in the body of the V-One and the same cylinder housing possibilities thanks to the revised fluid dynamics of the crank chamber, the drilling of the studs and the same accessories supplied with the V-One (except for the mixer pin ).
This crankcase has been designed to withstand higher powers and for this reason it is supplied with ball bearings on flywheel side Ø25xØ52x15 and transmission side Ø25xØ62x12, which eliminate needle roller bearings and allow greater capacity to withstand radial loads and further resistance to loads. axial, not contemplated with the original roller bearings. Dedicated oil seals are also provided.
The greater resistance to the stresses due to the crank mechanism makes the crankcase perfect to be mounted with our single-ring MHR cylinders, art. 3117163 (stroke 57), but especially with the kit 3117361 (stroke 60). The natural combination for this configuration is with the Malossi full-shoulder 60 stroke crankshaft, supplied with the right balance and perfect for the reed valve power supply provided for the new VR-One.
