Xmotorstore Payments
Malossi V-One crankcase with rotary valve 5718392
Code: 5718392
The V-One has been designed for those who want a perfectly replaceable crankcase with the original, supplied with all the components necessary for assembly (see above), and which allows maximum interchangeability with the components on the market. The V-One lends itself to being used both for a complete restoration, as it does not require any modification of the vehicle and adapts to all the original Piaggio parts, and for a simple "refresh" that gives a pinch of liveliness to the engine with a 'moderate processing like that offered by our Ø 63 heating unit, art. 3118005, which does not require any additional modifications.
The main seats are designed to accept the original bearings and crank oil seals (not supplied). V-One can be mounted with the original Dell'Orto Si 24-24 carburetor, in particular the assembly of the mixer is easy and is made possible by the special support pin, included and supplied already assembled. It is possible to use the original crankshaft or our rotating valve crankshaft with 57mm stroke art. 5317510. Whatever the choice, the power supply has in any case been revised and implemented thanks to our modern CAD systems which have profiled an inlet duct in the optimized crankcase.
Malossi crankcase compatible with:
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 80 2T
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 125 2T EURO 0-1
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 125 2T EURO 2 (VLX2M)
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 125 2T EURO 3
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 150 2T EURO 0-1
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 150 2T EURO 2 (VLX2M)
5718392 CRANKCASE MALOSSI VONE ROTARY VALVE VESPA VESPA PX 150 2T EURO 3
Reference: 5718393B
Brand: Malossi
Malossi V-one bare casing, Malossi code: 5718393B. The images can sometimes differ from the product to which they refer. Applies to v-one rotary valve crankcase.
Reference: 0616824B
Brand: Malossi
Malossi O-ring diameter 16x2.65 mm Malossi code: 0616824B
Reference: 6618041B
Brand: Malossi
Malossi roller bearing diameter 29x35x13 mm 6618041B Malossi code: 6618041B
Reference: 01.SW.0215.L
Brand: Ohvale
Ohvale Bolt M6x12 Code: 01.SW.0215.L
Reference: 204.0903/D
Brand: POLINI
Honda Crf 450 piston diameter 100 mm selection D (99.965 mm). Polini Code: 204.0903 / D Honda piston for: Honda, Honda Crf 450, Polini
Reference: 343.0611
Brand: POLINI
Polini tapered needle kit for CP carburetors. Includes 6 different needles + 5 retaining clips. Code 343.0611.
Reference: 3116144
Brand: Malossi
Malossi cylinder diameter 49 in aluminum with pin diameter 10 4T Malossi code: 3116144
Reference: 209.0418
Brand: POLINI
Honda x8r gasket set diameter 39 mm 209.0418
Reference: 641007
Brand: T4TUNE
complete clutch kit Ø 107 engine 139QMB 4T 50cc
Reference: 5514398
Brand: Malossi
Malossi Digitronic Mhr 5514398 digital electronic control unit Code: 5514398 Malossi digital electronic control unit Digitronic Mhr Team with Trimmer. Malossi ignitions concentrate the maximum technology applied to competitions. The new internal rotor ignitions arise from the need to overcome the technical limitations of the original flywheel-ignition...
Reference: 050.2122
Brand: POLINI
Polini engine support swing arm for Piaggio Zip, for h2o version. Polini code: 050.2122 Spare part for Polini Evolution P.R.E. engine Application: PIAGGIO ZIP 50 2T SP H2O from 2001 - ZIP 50 2T SP H2O from 1996 to 2000.
Reference: 1117422B
Brand: Malossi
Complete gasket kit for 47 diameter cylinder kit Malossi code: 1117422B
Reference: 01.SB.0213.L
Brand: Ohvale
Ohvale Guide chain roller pin Code: 01.SB.0213.L
Reference: 243.077
Brand: POLINI
Polini contrast spring for Piaggio 125/300 2 / 4T Code: 243.077 Application: Aprila, Aprila Atlantic 125/200/250/300, Aprila Scarabeo 125/200/250/250 LIGHT ie from 2007/300 Special ie, Aprila Sportcity 125/125 one / 200 / cube 250 / street 300, Aprila SR 125 / 125 Max 4T i E3 / 150/300 Max 4T ie, Aprilia Mojito 125 RY, Benelli, Benelli Adiva 125/150,...
Reference: 61 7226
Brand: Malossi
X Special Malossi belt for pulley d.80 10x8x940 mm angle 36 Malossi code: 61 7226 Malossi belt for ITALJET PACK 50 2T. Malossi belt for PIAGGIO CIAO 50 2T. Malossi belt for PIAGGIO CIAO PX 50 2T.
Reference: 143.002.003
Brand: POLINI
Polini minibike engine liquid cooled 6.2 hp displacement 40 cc 2 stroke. The engine is compatible with 910 and 911 mini bikes. Polini code: 143.002.003.
Reference: 3216694
Brand: Malossi
Malossi Flip exhaust approved 3216694 Code: 3216694 Expansion MUFFLER in special steel sheet (thickness 1.5 mm), obtained with molding processes. With internal silencing bulkheads, aluminum alloy support bracket with anti-vibration connection. Transparent fired varnish. Regenerable aluminum SILENCER.
Reference: 5009
Brand: STAMAS
Bushings kit for front Stamas floating disc.
Reference: 1610701
Brand: Malossi
Malossi phbh 30 bd fuel system for Vespa 1610701 Malossi code: 1610701 Malossi phbh 30 bd fuel system direct to the crankcase Application: VESPA PX E 200 2T fuel system
Malossi V-One crankcase with rotary valve 5718392
Code: 5718392
The V-One has been designed for those who want a perfectly replaceable crankcase with the original, supplied with all the components necessary for assembly (see above), and which allows maximum interchangeability with the components on the market. The V-One lends itself to being used both for a complete restoration, as it does not require any modification of the vehicle and adapts to all the original Piaggio parts, and for a simple "refresh" that gives a pinch of liveliness to the engine with a 'moderate processing like that offered by our Ø 63 heating unit, art. 3118005, which does not require any additional modifications.
The main seats are designed to accept the original bearings and crank oil seals (not supplied). V-One can be mounted with the original Dell'Orto Si 24-24 carburetor, in particular the assembly of the mixer is easy and is made possible by the special support pin, included and supplied already assembled. It is possible to use the original crankshaft or our rotating valve crankshaft with 57mm stroke art. 5317510. Whatever the choice, the power supply has in any case been revised and implemented thanks to our modern CAD systems which have profiled an inlet duct in the optimized crankcase.
