Xmotorstore Payments
Malossi Mp-One crankcase with point ignition 5717892
Code: 5717892
Pair of shot-blasted die-cast silicon aluminum alloy carters. Malossi integral design with lamellar admission, controlled by a large 4-petal valve.
Available in 2 versions that include the entire range of Piaggio and Gilera mopeds:
electronic ignition
ignition with points
They can be used with any thermal group, exhaust system, crankshaft and fuel system.
The Malossi reed covers are perfectly interchangeable with the original ones and are equipped with a special intake manifold for the original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburettor and E12 type air filter, complete with every detail for assembly.
Given the very limited insertion spaces in Piaggio frames, it was necessary to create a super compact engine, and the great commitment of our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, sturdiness, simplicity, ease of assembly, excellent operating result without making changes (everything is reconnected as in the original engine).
The large 4-petal reed valve in composite fibers ensures smooth and progressive admission that optimizes the torque curve starting from the lowest revs and allows you to deliver maximum power.
Malossi crankcase compatible with:
5717892 CRANKCASE MP-ONE WITH POINT IGNITION PIAGGIO BRAVO 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINTS IGNITION PIAGGIO CIAO 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINTS IGNITION PIAGGIO CIAO PX 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINTS IGNITION PIAGGIO SI 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINTS IGNITION PIAGGIO BRAVO 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINT IGNITION PIAGGIO BOSS 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINT IGNITION PIAGGIO GRILLO 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINTS IGNITION PIAGGIO SUPERBRAVO 50
5717892 CRANKCASE MALOSSI MP-ONE WITH POINTS IGNITION PIAGGIO BOXER 50 2T
Reference: 02 6265B
Brand: Malossi
Malossi intake manifold 13x16 mm 02 6265B Code: 02 6265B Malossi intake manifold for Sha 13 carburetors
Reference: 5112206
Brand: Malossi
Malossi Multivar 5112206 Variator for Dinli Code: 5112206 Malossi Multivar variator for Atv-quad Multivar is very simple to apply and easy to operate. It is studied in every detail and tested on each specific application. With such a sophisticated variator, your scooter will acquire snap, shift linearity and greater mechanical "tranquility" in gear, even...
Reference: 01.SD.0209.L
Brand: Ohvale
Ohvale Shaft W/ weight decomp. VER3 Code: 01.SD.0209.L
Reference: 5217420
Brand: Malossi
Clutch and bell Malossi Maxi Fly System Mhr 5217420 Malossi code: 5217420 Clutch and bell Malossi Maxi Fly System with bell diameter 153 mm.
Reference: 1311614
Brand: Malossi
Malossi rubber assembly for oversized shock absorbers Malossi code: 1311614
Reference: 174.2125
Brand: POLINI
Beta sintered brake pads Code: 174.2125 Application: Beta, Beta RR 50 Enduro, Beta Motard 50
Reference: 112.010.41
Brand: XRACING
Replacement slider cable for minimoto starter. Replacement slider cable for pull start minimoto, compatible with: Bzm minimoto starter. Cs minimoto starter. Polini minimoto starter. Ghr minimoto starter.
Reference: 01.MO.0018.L
Brand: Ohvale
Ohvale Breathe tube Code: 01.MO.0018.L
Reference: 01.SZ.0302.L
Brand: Ohvale
Ohvale O-RING 18×3 Code: 01.SZ.0302.L
Reference: 6111120
Brand: Malossi
Malossi Fixed Half Pulley Malossi Code: 6111120
Reference: 200.0425
Brand: POLINI
Polini for race muffler for Piaggio Ciao Si 4 studs. Code: 200.0425 The Polini FOR RACE muffler for Piaggio mopeds has been designed to be mounted only in combination with the Polini For Race 4-stud cylinder with central exhaust outlet (code 140.0136). Performance is excellent and well balanced between acceleration and speed. The muffler is suitable for...
Reference: 174.2071
Brand: POLINI
Polini sintered brake pads 39x102x9,8 mm Code: 174.2071 Application: Honda, Honda Silver wing 400/600, Honda SH 125i ABS E3 / 150i ABS E3 / 125i ABS E4 / 150i ABS E4 / 300i E4 / 125i ABS Euro 5 / 150i ABS Euro 5/350 E5, Kymco, Kymco X Citing 250/500 / 500i / 300 i 2V, Kymco Downtown 300i 4V / 125i 4V / 200i 4V, Kymco K-XCT 125 i 4V, Kymco Dink street 125...
Reference: 174.0047
Brand: POLINI
Brake pads Suzuki Burgman, Skywawe 250, 400x, k3, k6 Code 174.0047 These pads are applicable as a replacement to replace the original pads for: Suzuki Burgman / Skywawe 250 brake pads, Suzuki Burgman / Skywawe 400 X brake pads, Suzuki Burgman / Skywawe 400 K3 brake pads, Suzuki Burgman / Skywawe 400 K6 brake pads
Reference: 0413258
Brand: Malossi
Malossi red filter e15 air filter with 60 mm inlet for threaded carburetors. Malossi code: 0413258 E15 filters: The great novelty of these new Red Filters is the absence of a rigid structure that makes them adaptable to any assembly requirement. E15 air filters: with self-extinguishing expanded polyurethane filter element applicable to Dellorto, Mikuni,...
Reference: 209.0457
Brand: POLINI
Gasket set Kymco Kxr 250cc 209.0457
Reference: 200.2055
Brand: POLINI
Polini muffler for Vespa 50 PK XL HP silenced expansion. Polini Code: 200.2055. The Polini 200.2055 muffler is compatible with: VESPA 50 2T HP, FL2 - VESPA 50 2T PK - VESPA 50 2T XL
Reference: 4567 37 F
Brand: PBR
Pitbike chainring 4 holes 37 teeth. Made in Italy chainring for pitbike with 4 holes, 37 teeth. Pitbike crown measurements: Central hole: 48 mm Distance between holes: 68 mm Fixing screw holes diameter: 8.5 mm Crown code: 4567 37 F
Malossi Mp-One crankcase with point ignition 5717892
Code: 5717892
Pair of shot-blasted die-cast silicon aluminum alloy carters. Malossi integral design with lamellar admission, controlled by a large 4-petal valve.
Available in 2 versions that include the entire range of Piaggio and Gilera mopeds:
electronic ignition
ignition with points
They can be used with any thermal group, exhaust system, crankshaft and fuel system.
The Malossi reed covers are perfectly interchangeable with the original ones and are equipped with a special intake manifold for the original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburettor and E12 type air filter, complete with every detail for assembly.
Given the very limited insertion spaces in Piaggio frames, it was necessary to create a super compact engine, and the great commitment of our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, sturdiness, simplicity, ease of assembly, excellent operating result without making changes (everything is reconnected as in the original engine).
The large 4-petal reed valve in composite fibers ensures smooth and progressive admission that optimizes the torque curve starting from the lowest revs and allows you to deliver maximum power.
