Xmotorstore Payments
Malossi Mp-One engine crankcase with electronic ignition 5717514
Code: 5717514
The Malossi reed covers are perfectly interchangeable with the original ones and are equipped with a special intake manifold for the original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburettor and E12 type air filter, complete with every detail for assembly.
Given the very limited insertion spaces in Piaggio frames, it was necessary to create a super compact engine, and the great commitment of our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, sturdiness, simplicity, ease of assembly, excellent operating result without making changes (everything is reconnected as in the original engine).
The large 4-petal reed valve in composite fibers ensures smooth and progressive admission that optimizes the torque curve starting from the lowest revs and allows you to deliver maximum power.
Malossi crankcase compatible with:
5717514 CARTER MP-ONE WITH ELECTRONIC IGNITION PIAGGIO SI 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO CIAO 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO CIAO PX 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO SI 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO BRAVO 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO BOSS 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO GRILLO 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO SUPERBRAVO 50
5717514 CRANKCASE MALOSSI MP-ONE WITH ELECTRONIC IGNITION PIAGGIO BOXER 50 2T
Reference: 02 6265B
Brand: Malossi
Malossi intake manifold 13x16 mm 02 6265B Code: 02 6265B Malossi intake manifold for Sha 13 carburetors
Reference: 206.0210
Brand: POLINI
Polini segment diameter 57,5x1,5 mm 206.0210 Polini segment for: Vespa, Vespa 50, Polini, Piaggio, Piaggio Ape 50
Reference: Xracing-chiave-frizione
Brand: XRACING
Minibike clutch adjustment wrench. Key to adjust the minibike clutch nuts, compatible with clutches: Polini, Ghr, Bzm, Cs, Iame, and others.
Reference: 2516232
Brand: Malossi
Complete Malossi ignition cover for MHR C one and RC one crankcases Malossi code: 2516232
Reference: 5519933
Brand: Malossi
Malossi electronic control unit Force Master 2.1 5519933 Malossi code: 5519933 Carburetion Adjustment ±14% at min/mid/max Rev Limiter: 9,250 RPM 4 different mappings: Curve 0 (125 cc vehicles): original exhaust, Malossi cylinder, original head, original camshaft, original filter Curve 1 (125 cc vehicles): Malossi exhaust with dB-killer, Malossi cylinder,...
Reference: MC1SF
Brand: HJC
HJC RPHA 72 Value Helmet HJC RPHA 72 Value full-face helmet. Premium Integrated Matrix / PIM™: Prepreg is a high-performance material infused with a strong epoxy resin and a special fiber woven fabric, widely used in the aviation industry and racing for its maximum performance and lightweight properties. With the second-generation PIMPremium Integrated...
Reference: 245.910
Brand: POLINI
Fuel filter d.8 mm Polini. Code 245.910.
Reference: 143.010.016
Brand: POLINI
Polini minimoto cylinder 143.010.016 Polini cylinder with air piston 5 ports d.36 COMPLETE WITH PISTON, BAND AND PIN. THE KIT DOES NOT INCLUDE THE HEAD.
Reference: 55 8132
Brand: Malossi
Malossi Tc Unit 55 8132 electronic control unit Code: 55 8132 The incessant development of electronics in the motor sector has led Malossi to the creation and marketing of a complete line of electronic control units for road and racing scooters which embody maximum technology. Each control unit model has been expressly studied for the scooter on which it...
Reference: 01.SB.0112.L
Brand: Ohvale
Ohvale Gasket left cylinder head cover Code: 01.SB.0112.L
Reference: 03.CA.0051.L
Brand: Ohvale
Ohvale Gp-2 Painted Fairing Code: 03.CA.0051.L Ohvale GP-2 painted front fairing, the gp-2 "musetto" front fairing is made of fiber, resistant and durable.
Reference: 6215031BS
Brand: Malossi
Malossi MHR Synt approved brake pads Malossi code: 6215031BS Malossi brake pads for APRILIA LEONARDO 250 4T LC vehicles produced 1999 APPROVED Malossi brake pads for APRILIA SCARABEO 125 4T LC (ROTAX) vehicles produced 1998 2003 APPROVED Malossi brake pads for APRILIA SCARABEO 150 4T LC (ROTAX) vehicles produced 1998 APPROVED Malossi brake pads for...
Reference: 242.205
Brand: POLINI
Polini rollers 26,1X12,8 pieces 8. Available: 242.200 ROLLS 26.1X12.8 GR.20.2 242.201 ROLLS 26.1X12.8 GR.15.8 242.202 ROLLS 26.1X12.8 GR.14.6 242.203 ROLLS 26.1X12.8 GR.12.0 242.204 ROLLS 26.1X12.8 GR.11.5 242.205 ROLLS 26.1X12.8 GR.11.0
Reference: 215.0110
Brand: POLINI
Polini intake manifold for Vespa PX PE diameter 28 mm. Polini Code: 215.0110
Reference: 01.SB.0405.L
Brand: Ohvale
Ohvale Oil tube Code: 01.SB.0405.L
Reference: 204.0905/B
Brand: POLINI
Polini XP4 piston diameter 52 mm selection B Polini piston for: Polini, Polini XP4T 110 4 valves
Reference: 3413558
Brand: Malossi
Piston 2T diameter 40 mm Malossi 3413558 Malossi code: 3413558. Piston 2T diameter 40 mm Malossi 3413558 with pin diameter 10 and 1 rectangular segment. Selection: 0/A/B/C Each selection step is equivalent to an increase of 0.01 mm.
Malossi Mp-One engine crankcase with electronic ignition 5717514
Code: 5717514
The Malossi reed covers are perfectly interchangeable with the original ones and are equipped with a special intake manifold for the original carburetor or a SHA 13/13 carburetor.
A specific fuel system has been created with a 19 mm carburettor and E12 type air filter, complete with every detail for assembly.
Given the very limited insertion spaces in Piaggio frames, it was necessary to create a super compact engine, and the great commitment of our technicians is once again crowned with full success.
The objectives achieved are: highly technical product, sturdiness, simplicity, ease of assembly, excellent operating result without making changes (everything is reconnected as in the original engine).
The large 4-petal reed valve in composite fibers ensures smooth and progressive admission that optimizes the torque curve starting from the lowest revs and allows you to deliver maximum power.
