Xmotorstore Payments
Malossi crankcase for Vespa Px E 200cc 2t. Malossi code: 5717230
The Malossi Vr-one crankcase is for power purists, for those who want to push their Vespa to the limit, but that's not all. It has the same mounting characteristics in the body of the V-One and the same cylinder housing possibilities thanks to the revised fluid dynamics of the crank chamber, the drilling of the studs and the same accessories supplied with the V-One (except for the mixer pin ).
This crankcase has been designed to withstand higher powers and for this reason it is supplied with ball bearings on flywheel side Ø25xØ52x15 and transmission side Ø25xØ62x12, which eliminate needle roller bearings and allow greater capacity to withstand radial loads and further resistance to loads. axial, not contemplated with the original roller bearings. Dedicated oil seals are also provided.
The greater resistance to the stresses due to the crank mechanism makes the crankcase perfect to be mounted with our single-ring MHR cylinders, art. 3116349 (stroke 57), but especially with the kit 3116351 (stroke 60). The natural combination for this configuration is with the Malossi full shoulder 60 stroke crankshaft art. 5316176, supplied with the right balance and perfect for the reed valve power supply provided for the new VR-One.
Malossi crankcase for Vespa Px E 200cc 2t. Malossi code: 5717230
The Malossi Vr-one crankcase is for power purists, for those who want to push their Vespa to the limit, but that's not all. It has the same mounting characteristics in the body of the V-One and the same cylinder housing possibilities thanks to the revised fluid dynamics of the crank chamber, the drilling of the studs and the same accessories supplied with the V-One (except for the mixer pin ).
This crankcase has been designed to withstand higher powers and for this reason it is supplied with ball bearings on flywheel side Ø25xØ52x15 and transmission side Ø25xØ62x12, which eliminate needle roller bearings and allow greater capacity to withstand radial loads and further resistance to loads. axial, not contemplated with the original roller bearings. Dedicated oil seals are also provided.
The greater resistance to the stresses due to the crank mechanism makes the crankcase perfect to be mounted with our single-ring MHR cylinders, art. 3116349 (stroke 57), but especially with the kit 3116351 (stroke 60). The natural combination for this configuration is with the Malossi full shoulder 60 stroke crankshaft art. 5316176, supplied with the right balance and perfect for the reed valve power supply provided for the new VR-One.
Reference: 5716908B
Brand: Malossi
Malossi VR-One engine casing. Malossi code: 5716908B
Reference: 0616824B
Brand: Malossi
Malossi O-ring diameter 16x2.65 mm Malossi code: 0616824B
Reference: 0618108B
Brand: Malossi
Malossi Intake Gasket for VR-One Crankcase Malossi Code: 0618108B
Reference: 6618041B
Brand: Malossi
Malossi roller bearing diameter 29x35x13 mm 6618041B Malossi code: 6618041B
Reference: 1317660b
Brand: Malossi
Malossi MHR sleeve for carburetors diameter 34 with inlet diameter 39 Malossi code: 1317660b
Reference: 1317661b
Brand: Malossi
Malossi MHR FKM sleeve diameter 30 for Dell'Orto PHBH carburetors Malossi code: 1317661b
Reference: 01.SD.0306.L
Brand: Ohvale
Ohvale Nut small M14 Code: 01.SD.0306.L
Reference: 6113501
Brand: Malossi
Malossi X K belt strap for scooter 18x9x743 mm angle 30 Malossi code: 6113501 Malossi belt for GARELLI FLEXI' 50 4T euro 2 (1P139 QMB). Malossi belt for GARELLI TIESSE FOUR 50 4T euro 2 (1P39QMB). Malossi belt for HUPPER MONTECARLO 30 50 4T (139QMB). Malossi belt for KYMCO AGILITY R10/12 - RS 50 4T euro 2 (KL10B). Malossi belt for KYMCO AGILITY R12 50 ie...
Reference: 215.0448
Brand: POLINI
Polini 360 degree intake manifold sleeve 25.5mm. Polini Code: 215.0448
Reference: 248.076
Brand: POLINI
Polini variator belt for Yamaha X Max 125 Aramid Code: 248.076 Application: Yamaha, Yamaha X City 125 4V E3, Yamaha X Max 125 4V E3 / 125 4V E4, Mbk, Mbk Cityliner 125 4V E3, Mbk Skycruiser 125 E3
Reference: 209.0478
Brand: POLINI
Polini gaskets series diameter 61 mm Polini gaskets set for: Piaggio, Piaggio Medley 125, Piaggio Medley 150, Vespa, Vespa 125, Vespa 150 Polini gaskets set for Piaggio Medley 125/150 4T
Reference: 5216541
Brand: Malossi
Malossi clutch disc set for Minarelli engines 5216541 Malossi code: 5216541 Malossi clutch disc set for Minarelli Am3, Am6 engines.
Reference: 3215630B
Brand: Malossi
Malossi 3215630B racing exhaust manifold assembly for Bmw Code: 3215630B Malossi racing exhaust manifold assembly for Bmw C 600 Sport up to 2015
Reference: GHR 559.010
Brand: GHR
Ghr expansion for 40cc air motor (10 12 15 and free). Available to choose between: Ghr expansion for 40cc flange 10 air motor. Ghr expansion for 40cc flange 12 air motor. Ghr expansion for 40cc flange 15 air motor. Ghr expansion for 40cc flanged air motor.
Reference: 143.195.002
Brand: POLINI
Minibike roller cage 10x13x14.5 mm. Roller cage for 10mm gudgeon pin, 13mm outer diameter, 14.5mm length.
Reference: 03.IF.0054.L
Brand: Ohvale
Ohvale Gp-2 sintered front brake pads. Ohvale code: 03.IF.0054.L Attention: Original Ohvale branded brake pads approved for the CIV. Original Ohvale brake pads for Gp-2 version, sintered material pads. Compatible for: Ohvale Brembo brake pads. Ohvale JJuan brake pads.
Reference: 111A
Brand: DM
Dm minimoto swingarm pads 2 pieces. New Dm pads for aluminum swingarm. The pads must be mounted exclusively with the 2025 chain tie rods, product code 111. This 2025 update of the Dm minimoto, improves the protection of the minimoto, without altering its performance and ease of adjustment.
Reference: 211.0299
Brand: POLINI
Polini head for Peugeot Jet Force 50cc 47 mm. Polini Code: 211.0299
Reference: 5430.96.04-00
Brand: Domino
Domino throttle cables for XM2 throttle control. Domino code: 5430.96.04-00. Gas cables to be used only with Domino XM2 gas controls. The product may differ from the images. Recommended for track/racing use. Install in a qualified workshop.
Reference: 5217624
Brand: Malossi
Malossi clutch shoes for automatic clutch 5217624 Malossi code: 5217624 Malossi clutch shoes for automatic clutch Maxi Fly clutch
Reference: 203.0095
Brand: POLINI
Polini plastic air box inclined 90 degrees. Available in the variants: 203.0093 filter for Phbg, measures: 32x135x80 203.0094 filter for Phbg racing, measures: 37x135x80 203.0095 filter for Phbg, measures: 32x125x65 203.0096 filter for Phbg racing, measures: 37x125x65 203.0098 filter for Cp Polini, sizes: 46x140x80
Reference: 171.0665
Brand: POLINI
Polini stator for Pvl Piaggio Yamaha ignition Polini stator for: Aprilia, Aprilia AF1 50, Aprilia Amico 50, Aprilia Area 51, Aprilia Gulliver 50, Aprilia MX 50, Aprilia Rally 50, Aprilia RS 50, Aprilia RX 50, Aprilia Sonic 50, Aprilia SR 50, Aprilia Tuono 50, Aprilia Scarabeo 50, Atala, Atala Carosello, Benelli, Benelli 491 50gt, Benelli k2 50, Benelli...
Malossi crankcase for Vespa Px E 200cc 2t. Malossi code: 5717230
The Malossi Vr-one crankcase is for power purists, for those who want to push their Vespa to the limit, but that's not all. It has the same mounting characteristics in the body of the V-One and the same cylinder housing possibilities thanks to the revised fluid dynamics of the crank chamber, the drilling of the studs and the same accessories supplied with the V-One (except for the mixer pin ).
This crankcase has been designed to withstand higher powers and for this reason it is supplied with ball bearings on flywheel side Ø25xØ52x15 and transmission side Ø25xØ62x12, which eliminate needle roller bearings and allow greater capacity to withstand radial loads and further resistance to loads. axial, not contemplated with the original roller bearings. Dedicated oil seals are also provided.
The greater resistance to the stresses due to the crank mechanism makes the crankcase perfect to be mounted with our single-ring MHR cylinders, art. 3116349 (stroke 57), but especially with the kit 3116351 (stroke 60). The natural combination for this configuration is with the Malossi full shoulder 60 stroke crankshaft art. 5316176, supplied with the right balance and perfect for the reed valve power supply provided for the new VR-One.
