- New
Xmotorstore Payments
Bearing and spacer kit for Grc front hub.
Grc code: 112.078.00
Bearing and spacer kit for Grc front hub.
Grc code: 112.078.00
For 94 mm Grc front hub.
Internal spacer length: 78 mm.
High speed bearings for better wheel sliding.
Reference: M088014-T41
Brand: PMT TYRES
PMT 90/65R6.5 "T41 slick tires for minibike. For racing use only. type: minibike 6.5 drawing type: slick hardness mixes: 56 Shore A rubber width: 90mm rubber shoulder: 65 drawing usage: dry use of mix: racing recommended rim width: 60-66mm pressures: 1 - 1.4 Bar
Reference: Used-grc-rim
Brand: GRC
Grc minibike rim used. Used rim for Grc minimoto, with 6-hole connection. Attention: used products are excluded from the guarantee.
Reference: grc-cerchio-58
Brand: GRC
Minimoto Grc rim. Original Grc rim for minimoto, midi and mini. Grc rim features: Material: aluminum. Machining: machined from solid. Channel: 58 mm (internal). Spokes: 3. For tires: 6.5 inches PMT.
Reference: 209.0437
Brand: POLINI
Polini gasket series diameter 47.6 mm 209.0437 Code: 209.0437 Polini gasket set for Yamaha-Mbk Booster Polini gaskets set for: Aprilia, Aprilia Amico 50, Aprilia SR 50, Italjet, Italjet Pista 50, Mbk, Mbk Booster 50, Mbk Stunt 50, Yamaha, Yamaha Bw's 50, Yamaha Slider 50, Yamaha Spy 50, Polini
Reference: 17 2325
Brand: Malossi
Malossi levers and bushings for variator assembly Malossi code: 17 2325
Reference: 3214818.k0
Brand: Malossi
Malossi RX exhaust approved with catalyst for Piaggio Carnaby Malossi code: 3214818.k0 Malossi exhaust for Piaggio Carnaby 300 ie 4T LC euro 3 (Quasar) type: M60 var. 4 ver. 00. The "type" only specifies for which model the approval is valid, it does not limit its assembly.
Reference: 174.0013
Brand: POLINI
Original Polini brake pads Code: 174.0013 Application: Benelli, Benelli Devil 50, Benelli Spring 50, Gilera, Gilera 503, Gilera Bullit 50, Malaguti, Malaguti Dune 50, Malaguti F 12 50 Phantom LC, Malaguti Fifty 50 H2O / 50 TOP, Malaguti RCX / W 50 H2O, Motron , Motron Compact ES, Motron Sting, Motron Xle The original Polini brake pads are the pads that...
Reference: 246472199
Brand: Evok
EVOK Iron LED square 2-lens front headlight for Vespa 50 Special, product code 246472199. 6500K LED, Plug&Play installation, specific design for original handlebar.
Reference: 01.SW.0846.L
Brand: Ohvale
Ohvale Guide plate Code: 01.SW.0846.L
Reference: 5111812
Brand: Malossi
Malossi Multivar 2000 5111812 variator Code : 5111812
Reference: 206.0326
Brand: POLINI
Polini trapezoidal chromed segment 57.5x1.26 mm 206.0326
Reference: 4011
Brand: STAMAS
Stamas mechanical factory front brake caliper.
Reference: 01.IF.0100.L
Brand: Ohvale
Ohvale Gp-0 front brake pads. Ohvale code: 01.IF.0100.L Original Ohvale brake pads for Gp-0, sintered version for racing use. Ohvale pads valid for the CIV championship.
Reference: 01.SE.0007.B
Brand: Ohvale
Black tank fixing ring for Ohvale GP-0 and GP-2. Fits all models. Original spare part – Code 01.SE.0007.B.
Reference: 01.SB.0508.L
Brand: Ohvale
Ohvale Bolt M6x55 Code: 01.SB.0508.L
Reference: MC21
Brand: HJC
Hjc i80 helmet. "APC" Advanced Polycarbonate Compound: By blending premium polycarbonate with high impact resistant ABS in an optimal ratio, HJC has developed a strong and impact resistant shell, while maintaining a lightweight design. "ACS" Advanced Channeling Ventilation System: 2-level upper vents and lower vents; Full front to back airflow expels heat...
Reference: 250.032
Brand: POLINI
Polini clutch bell for Yamaha Majesty Evolution model diameter 120 mm Code 250.032 This Polini clutch bell is compatible as an original spare. Diameter: 120 mm Weight: 1200 gr Application: Benelli, Benelli Velvet 125, Italjet, Italjet Millenium 125, Malaguti, Malaguti Madison 125, Malaguti F 12 125 Phantom, Mbk, Mbk Doodo 125, Mbk Skykiner 125, Mbk...
Reference: 243.087
Brand: POLINI
Polini contrast spring for Piaggio Vespa 125 Primavera 4T Code: 243.087 Spring with 2 stops Application: Vespa, Vespa 125 4T Primavera 3V ie, Vespa 125 4T Sprint 3V ie, Vespa 150 4T Sprint 3V ie, Vespa 125 4T Primavera iGET 3V ie E4, Vespa 125 4T Sprint iGET 3V ie E4, Vespa 150 4T Sprint iGET 3V ie E4, Piaggio, Piaggio Liberty 125 3V ie from 2013 to 2014,...
Reference: 51 2639
Brand: Malossi
Malossi Variotop reverse mount variator 51 2639 Code: 51 2639 Malossi Variotop reverse mount variator for Mg-Mbk. Excludes the original clutch.
Bearing and spacer kit for Grc front hub.
Grc code: 112.078.00