- Reduced price
- New
Xmotorstore Payments
Malossi Maxi wing finned clutch bell 7719308B
Malossi code: 7719308B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 134 mm.
Weight 993 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.
Malossi clutch bell for:
Malossi clutch bell for Aprilia SR 125 2T.
Malossi clutch bell for Aprilia SR 150 2T.
Malossi clutch bell for Gilera Runner FX 125 2T LC.
Malossi clutch bell for Gilera Runner FXR - SP 180 2T LC.
Malossi clutch bell for Gilera Typhoon X 125 2T.
Malossi clutch bell for Gilera Typhoon 125 2T.
Malossi clutch bell for Italjet Dragster 125 2T LC.
Malossi clutch bell for Italjet Dragster 180 2T LC.
Malossi clutch bell for Piaggio Hexagon LX 125 2T LC.
Malossi clutch bell for Piaggio Hexagon LXT 180 2T LC.
Malossi clutch bell for Piaggio Hexagon 125 2T LC.
Malossi clutch bell for Piaggio Hexagon 150 2T LC.
Malossi clutch bell for Piaggio Skipper 125 2T.
Malossi clutch bell for Piaggio Skipper 150 2T.
Malossi clutch bell for Piaggio Skipper LX 125 2T.
Malossi clutch bell for Piaggio Skipper LXT 150 2T.
Reference: 1058.82.40.06-1
Brand: Domino
Pair of Domino Daytona grips 1058.82.40.06-1 Pair of vulcanized rubber grips, with rib. Material: Vulcanized rubber Black colour Length: 130 mm End: Closed Handlebar / Gas tube diameter: 22/26 mm Flange diameter: 47 mm Handle diameter Knob mounted: 33.5 mm
Reference: 03.RA.0103.L
Brand: Ohvale
Ohvale Front wheel pivot spacer from 2023 Code: 03.RA.0103.L
Reference: 31 8455
Brand: Malossi
Malossi MHR cylinder kit diameter 47.6 in aluminum with pin diameter 12 Malossi code: 31 8455 Malossi cylinder kit for APRILIA SR (carb.) 50 2T LC 2004 (PIAGGIO). The use of the 53 7600 crankshaft is recommended. Malossi cylinder kit for APRILIA SR R (carb.) 50 2T LC (PIAGGIO). The use of the 53 7600 crankshaft is recommended. Malossi cylinder kit for...
Reference: A261
Brand: Alfano
17 mm adapter for Alfano A261 temperature sensor. This adapter must be used with sensors: A2101 / A2111 / A2152.
Reference: 31 6746
Brand: Malossi
Malossi cylinder diameter 40 in aluminum for Peugeot 50 cc Malossi code: 31 6746 Malossi cylinder for Peugeot 103 -104 -105 50 2T also for original head. Malossi cylinder for Peugeot 103 RCX 50 also for original head. Malossi cylinder for Peugeot 103 SP 50 2T LC also for original head. Malossi cylinder for Peugeot 103 SPX 50 also for original head....
Reference: 5115552
Brand: Malossi
Malossi Multivar 2000 variator 5115522 Code: 5115552 Multivar 2000 When technology makes the difference. Multivar: the sports change with burning acceleration that does not give space! A jewel to be set in your scooter. Too bad that it cannot be exhibited, it is so perfect! Designed by highly experienced engineers, produced in full in the Malossi...
Reference: 209.0221
Brand: POLINI
Yamaha Dt 50 Chappy gasket set 209.0221 Code: 209.0221 Polini gasket set for: Yamaha, Yamaha Chappy 50, Yamaha DT 50, Polini
Reference: 242.224
Brand: POLINI
Polini rollers 25X15 pieces 8. Available: 242.220 ROLLS 25X15 GR.15,0 242.221 ROLLS 25X15 GR.14.0 242.222 ROLLS 25X15 GR.16,2 242.223 ROLLS 25X15 GR.19,0 242.224 ROLLS 25X15 GR.12,0 242.225 ROLLS 25X15 GR.13,0 242.226 ROLLS 25X15 GR.18.0 242.227 ROLLS 25X15 GR.11,0
Reference: A5210
Brand: Alfano
Cover for Alfano 6 and 7. Alfano Code: A5210 Protective cover for Alfano 6 and 7 instruments.
Reference: 3216643B
Brand: Malossi
Malossi Rx terminal 3216643B Code: 3216643B
Reference: 7715898B
Brand: Malossi
Malossi Maxi wing finned clutch bell 7715898B Malossi code: 7715898B. Maxi wing finned clutch bell internal diameter 134 mm Weight 1138 grams. The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low...
Reference: 31 6998
Brand: Malossi
Malossi cylinder diameter 47 in cast iron with pin diameter 12 Malossi code: 31 6998 Malossi cylinder for BSV Dio GP 50 (AF18E). Also adaptable to the original head. Malossi cylinder for BSV Dio SP 50 (AF18E). Also adaptable to the original head. Malossi cylinder for BSV Dio SR 50 (AF18E). Also adaptable to the original head. Malossi cylinder for BSV Dio...
Reference: 211.0293
Brand: POLINI
Piaggio Zip 47.6 mm air head. Polini Code: 211.0293
Reference: 142.0159
Brand: POLINI
Polini cylinder kit for Peugeot diameter 40 mm. Polini Code: 142.0159 Peugeot cylinder kit for: Peugeot, Peugeot Ludix 50, Peugeot Speedfight 3 50 2T air Cast iron cylinder
Reference: 01.FO.0003.L
Brand: Ohvale
Swingarm Ohvale pivot M12x220 complete for Gp-0 Gp-2 Code: 01.FO.0003.L
Reference: 203.3514
Brand: POLINI
Piaggio Vespa 125 ET4 paper oil filter (181) Code 203.3514 Polini paper oil filter for: Aprilia, Aprilia Habana125, Italjet, Italjet Torpedo 125, Piaggio, Piaggio Hexagon 125 Lx, Vespa, Vespa 125/150 4t ET4 Diameter 33x36 mm
Malossi Maxi wing finned clutch bell 7719308B
Malossi code: 7719308B.
Malossi Maxi Wing finned clutch bell.
Internal diameter 134 mm.
Weight 993 grams.
The anti-explosion thermal clutch bells are equipped with a finned reinforcement ring for the dissipation of heat which develops mainly during starts from a standstill and when the vehicle accelerates from low speeds.
This is a technological innovation derived from research carried out in the context of scooter competitions.
Here is the principle on which it is based:
the greater radiating surface considerably lowers the operating temperature of the bell, considerably increasing the life of the clutch unit.
The clutch unit is enormously stressed when driving around town, when starting uphill and when exiting tight hairpin bends with two people on board.
Here, to safeguard your clutch, Malossi has developed the Maxi Wing Clutch Bell.
It should not be overlooked that the finned reinforcement ring is even an anti-explosion element, as it has been designed to resist the high rotation speeds imposed by sporty driving, especially if the engine has been tuned, taking into account that the force spin increases squarely as the rpm increases.
Technical features:
-Bell made of mild steel sheet for deep drawing.
-Hub in special turned, welded and broached steel.
-Workplace turned within very strict values.
-Total dynamic balancing.
-Soft nitriding heat treatment.